itr dc2 cluster in 91 ef issues.

[enigma34]

if any one has done one can i have answers to why i cant get it to read on any of the needles. fuel, temp , and tach. idk about the speedo but that probable does not work either even thou i wired up the vss to ecu and cluster.

what does work is, back light, blinkers, hazard. and when i put power to oil,check engine, door, and ebrake thous work. but i cant get the needles to read, and i have been blowing fuses trying to fig it out .

this is what im going bye.

http://honda-tech.com/showthread.php?t=1732102

im guessing i am getting power to the temp and fuel gauge becuase they move very little either down or up when i turn key..

[2point1]

If your blowing fuses then you have a wire mixed up. How exactly did you wire it,pics help?

[enigma34]

ill post some up later. what i did was wire the correct color wire from the car to the same color wire on the cluster pig tails. and after i did that and got horrible results with not much working or lighting up, i started experimenting and thats why i blew some fuses.

[2point1]

Are you 100% sure the cluster works?

[enigma34]

how do i test it to see if its works? when i bought it off ebay said it was tested and works. have you done this swap be for? willing to pay to have some one come and get it working..

[enigma34]

[H22SteakSauce]

cut the grey wire should work