f/s new civic tucked engine harness

[2point1]

This is a brand new tucked engine harness. It runs from the motor straight to the ecu and uses ALL NEW mil spec wire, pins, seals (where seals can be used ) ecu plugs and nylon sleeving with adhesive Lined Heat Shrink Tubing.

Will work in all 92-95 civic and 94-95 integras, with d or b Manual Trans. swaps. Harness is wired for vtec, set up for an obd1 alt, dizzy and injectors. (if you need obd2 alt, dizzy and or injector plugs i can pin them on the harness as long as you have the plugs).

Price is $450 plus your old harness...I'm also including new 8 ga. power wire from the alt to under hood fuse box.

THIS IS NOT A HACKED UP HARNESS, it is a new harness.... everything used is brand new except for the engine sensor connectors and a few seals...this harness bypasses the pass side shock tower plugs meaning they will not be used,,just the driver side shock tower plug will be used.

mil spec harness covered in nylon sleeving with labels $675.00

obd-2a or b harness covered in nylon sleeving $525.00

4 wire o2 extension harness $35.00

vtec subharness obd-1 or obd-2 $35.00

distributor adapter harness both version $40.00

plug and play obd-2 resistor box harness(harness only) $35.00

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]
[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

heres a harness i did with the quick release plug on it...

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

obd-2 to obd-1 dizzy jumper....

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

got new labels,tell me what you think......

[IMG] Uploaded with ImageShack.us[/IMG]

the start to an obd2 civic harness........

[IMG] Uploaded with ImageShack.us[/IMG]

o2 extension harness
[IMG] Uploaded with ImageShack.us[/IMG

vtec sub harness...

[IMG] Uploaded with ImageShack.us[/IMG]

obd-2 plug and play resistor box harness..

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

[IMG] Uploaded with ImageShack.us[/IMG]

96-98 civic harness......



Uploaded with ImageShack.us

[ispin312]

bump

[2point1]

bump

thanks man..........

[jdmkid618]

shit looks legit...
Any pics on a car/motor

[jealous1shateric]

tell me a lil bit more cus idk how this would work

[ej1 sleeper]

jesus 450? better of goin to chasebay or rywire lol.

bump glws.

[SeanJDMJohn]

Bump cause I tucked the shit out of my car nd made my own engines harness but in a 92-95 civic I kno u can't just plug this into ur ecu cause then u would bypass the shock tower plugs which I'm sure most ppl use glwys if u do I'm sure someone is gunna want u to help em put it in

[94eg4dr]

bump

[2point1]

shit looks legit...
Any pics on a car/motor

thanks man...i dont have any pics of the harness on the car right now....

tell me a lil bit more cus idk how this would work

what would you like to know???

jesus 450? better of goin to chasebay or rywire lol.

bump glws.

chasebay and rywire harnesses are more money,plus with chase you dont know when you will get your harness.....

Bump cause I tucked the shot out of my car nd made my own engines harness but in a 92-95 civic I kno u can't just plug this into ur ecu cause then u would bypass the shock tower plugs which I'm sure most ppl use glwys if u do I'm sure someone is gunna want u to help em put it in

this harness is for a 92-95 civic and bypasses the shock tower plugs on the pass side and goes right to the ecu...there is no need to use the shock tower plugs with this harness other then the driver side shock tower plug.....harness plugs in to the sensor plugs on the motor and goes right to the ecu.....


hope i answered every ones question.......

[SeanJDMJohn]

U deff answered more info nd pm me where u got some of ur supplies for ur harness like heat shrink tubing nd the wire loom

[2point1]

bump

thanks man....

U deff answered more info nd pm me where u got some of ur supplies for ur harness like heat shrink tubing nd the wire loom

I cant be giving out my secrets.... lol

[<AllMOTORANDRE>]

bump reminds me of when chase bays was starting.... then he did at home tucks then boom millions!! good luck..

[2point1]

bump reminds me of when chase bays was starting.... then he did at home tucks then boom millions!! good luck..

thanks man!!

[2jzdreamin]

bump for a clean tucked harness.....glws......

[2point1]

bump for a clean tucked harness.....glws......

thanks man!!!!