rack and pinion replacement help

[jdmjuni]

what going on guys, i am going to buy my sisters integra off of her but it needs the rack and pinion replaced, does anyone know of a good write up that explains step by step on removing and replacing the rack and pinion? it is an automatic 94 integra with a 99 swap in it. any info is greatly appreciated.

[Mr Layy]

It's pretty easy dude. But lemme find one for you

[JdmEgHatch]

Good luck!!

[jdmjuni]

it's pretty easy dude. But lemme find one for you

good looks lay give me a call or text

good luck!!

good looks meng

[00civicLS]

its pretty easy just undo your tie rod ends, then take of the steering linkage. its like one 10 or 12mm under the dash you can see it and its easy to get to. then take out the bolts that hold the rack into the car. should be like 17 or 18mm on the driver side and like 15 or 16mm on the pass side. after you get all those out you have to move it around alot but it should come out. hope this helps a little.

[Mr Layy]

^^^^^thank you I was trying to find him write up, but you answered the question!

[jdmjuni]

its pretty easy just undo your tie rod ends, then take of the steering linkage. its like one 10 or 12mm under the dash you can see it and its easy to get to. then take out the bolts that hold the rack into the car. should be like 17 or 18mm on the driver side and like 15 or 16mm on the pass side. after you get all those out you have to move it around alot but it should come out. hope this helps a little.

^^^^^thank you I was trying to find him write up, but you answered the question!

thanks alot guys i really appreciate it

[sikauto1]

If im not mistaken doesnt the sub-frame have to come out?

[jdmjuni]

If im not mistaken doesnt the sub-frame have to come out?

i thought that but i think its only 4 bolts

[00civicLS]

ya no problem. i have a steering rack 0ut of a 94 civic coupe if you need it it might work idk.