Type r into 95 si

[CTinTEG]

I am putting a type r 98 spec into a 95si. Just got the shell and there is no engine harness. Now I know I need to wire up an obd2 dizzy and run obd1 fuel set up. My question is, can I use a d series harness on a b series motor? Will it fit. I found a 95 ex harness. Will this work for my swap? Any info will help. I already found info here http://technet.ff-squad.com/hybrid.92-95.obd2.htm
I mostly need to know about the harness and if it will fit. And the best way to get it set up to run for emissions too

[Dezzydez203]

Yeah you can use harness but you will need a jumper for the dizzy of your putting a obd2 one

[B16eg6]

Use an obd1 GSR or B16 Dizzy you can runn full obd1..

[CTinTEG]

Ok. So the a 95 ex harness will fit. Which distributors will fit the 98spec motor? I have a obd2 gsr dizzy that we were just gonna use and buy a jumper or hard wire. But I haven't gotten a chance to see if it will bolt up and I dont kno of it will run it right

[CTinTEG]

Are there any sensors that I need to change over? I will be using all the obd2 stuff with a obd1 95 civic ex harness.

[CTinTEG]

Bump

[B16eg6]

text me 12032158996 I can answer all of your questions.

[2point1]

Use a 96-01 integra harness. It's obd2 and is plug and play to the 95 civic. Depending on what integra harness you get there will be some plugs not used and you may need to wire in for VTec.

[SeanJDMJohn]

I have 2 harnesses I have a obd1 vtec harness and obd2b vtec harness both forsale both would be plug and play one or the other depending on which one u buy u will have to change some things in which I'll lead u in the right directions I also have dizzy and injectors and what not to help you out as much as possible