Tweet
Built GSR hatch FS/FT $5000 FIRM
NEW PICS
Trying to get outta the Honda Game. Selling my baby, i cant deal with it anymore nor have the money to keep dumping into it.
The shell is a 1997 Honda Civic Dx Hatchback.
It has a couple dents, nothing major. Its from 1997 after all.
The Idol control valve went on it so the RPMS fluctuate and then it stalls out. I don't wanna deal with this car anymore. Its a simple fix I have had it with this car.
It sits on 15 inch LS webs with Hancook 225/55s
Comes with a set of 14" BSA cobra rims also.
Now the good part, Ive invested over $8,000 into the engine compartment of this thing sadly...The motor itself was built by Billy in Watertown and it was tuned by David in Prospect CT and put down 184whp.
Here is the list of parts
*Engine* OBD1 B18c1/B18c5 head BUILT FOR 12 lbs of boost or a 100 shot.
-JE 10-1-0 pistons and rings 5mm over
-Eagle H beam rods
-Cleavite Main Bearings
-Cleavite Rod Bearing
-Cleavite thrust bearing
-Fel-Pro Gasket set
-Eagle Block Guard
-ARP headstuds
-GSR oil pump
-ARP Main Studs
-Jet washed block bored.20 over and honed with torque plate
-Decked block
-Line honed
-Magnafluxed crank
-Computer-Balanced roatating assembly
-Mobil 1 10w-30 Synthetic
-AC/DELCO Filter
*HEAD*
~2000(B18c5/PR3)Integra Type-R head OBD2~
-260cc injectors MAXED
-Brian Crower Stage II cams
-Supertech titanium valve springs and retainers
-Ferrara competition plus valves
-High temperature valve seals
-Mugen twin layer head gasket
-Resurfaced Head
*Intake/exhaust*
-Skunk2 Pro series Intake Manifold
-Skunk2 Pro 70mm throttle body
-AEM v2 CAI
-K&N Filter
-Vibrant exhaust header for B18c1
-Random Tech High flow cat 2 1/2"
-Replica Greddy Evo gen1 2.5" catback exhaust to 4 1/2 " outlet
*Cooling System*
-Godspeed halfsize aluminum radiator
-1998 Honda Civic Ex Fan w/shroud
-GSR water pump
*ECU*
-OBD1 chipped P06 ECU Tuned by Dave at Dave's Tuning in Prospect CT, (CHROME)
-Two step launch control
*Transmission*
-S80 transmission with 99-00 Honda Civic Si Gears
-Spek Stage II clutch
-Short ratio gears (Track)
-Fidanza lightweight flywheel
-Suspension-
-KYB GR2 shocks and struts
-Eibach coil overs 1 1/4" drop
-99-00 Honda Civic Si Sway Bars
-Interior-
99-00 Honda Civic Si Gauge cluster
99-00 Honda Civic Si Front Bucket seats (Cloth)
Panels stripped, No backseats, or rear
(comes with all interior pieces and hardware)
Serious inquires only. Im not going below $5,000. Getting it fixed tomorrow, along with putting the interior back in it. I will tack on the price of the idol control valve and labor if its not sold today.
Message me for more pics of her. I want this thing gone ASAP.
CLEAN VINS MATCHING VINS CLEAN CT TITLE
(203) 460-7079 Call or text my name is Eric.
Trying to get outta the Honda Game. Selling my baby, i cant deal with it anymore nor have the money to keep dumping into it.
The shell is a 1997 Honda Civic Dx Hatchback.
It has a couple dents, nothing major. Its from 1997 after all.
The Idol control valve went on it so the RPMS fluctuate and then it stalls out. I don't wanna deal with this car anymore. Its a simple fix I have had it with this car.
It sits on 15 inch LS webs with Hancook 225/55s
Comes with a set of 14" BSA cobra rims also.
Now the good part, Ive invested over $8,000 into the engine compartment of this thing sadly...The motor itself was built by Billy in Watertown and it was tuned by David in Prospect CT and put down 184whp.
Here is the list of parts
*Engine* OBD1 B18c1/B18c5 head BUILT FOR 12 lbs of boost or a 100 shot.
-JE 10-1-0 pistons and rings 5mm over
-Eagle H beam rods
-Cleavite Main Bearings
-Cleavite Rod Bearing
-Cleavite thrust bearing
-Fel-Pro Gasket set
-Eagle Block Guard
-ARP headstuds
-GSR oil pump
-ARP Main Studs
-Jet washed block bored.20 over and honed with torque plate
-Decked block
-Line honed
-Magnafluxed crank
-Computer-Balanced roatating assembly
-Mobil 1 10w-30 Synthetic
-AC/DELCO Filter
*HEAD*
~2000(B18c5/PR3)Integra Type-R head OBD2~
-260cc injectors MAXED
-Brian Crower Stage II cams
-Supertech titanium valve springs and retainers
-Ferrara competition plus valves
-High temperature valve seals
-Mugen twin layer head gasket
-Resurfaced Head
*Intake/exhaust*
-Skunk2 Pro series Intake Manifold
-Skunk2 Pro 70mm throttle body
-AEM v2 CAI
-K&N Filter
-Vibrant exhaust header for B18c1
-Random Tech High flow cat 2 1/2"
-Replica Greddy Evo gen1 2.5" catback exhaust to 4 1/2 " outlet
*Cooling System*
-Godspeed halfsize aluminum radiator
-1998 Honda Civic Ex Fan w/shroud
-GSR water pump
*ECU*
-OBD1 chipped P06 ECU Tuned by Dave at Dave's Tuning in Prospect CT, (CHROME)
-Two step launch control
*Transmission*
-S80 transmission with 99-00 Honda Civic Si Gears
-Spek Stage II clutch
-Short ratio gears (Track)
-Fidanza lightweight flywheel
-Suspension-
-KYB GR2 shocks and struts
-Eibach coil overs 1 1/4" drop
-99-00 Honda Civic Si Sway Bars
-Interior-
99-00 Honda Civic Si Gauge cluster
99-00 Honda Civic Si Front Bucket seats (Cloth)
Panels stripped, No backseats, or rear
(comes with all interior pieces and hardware)
Serious inquires only. Im not going below $5,000. Getting it fixed tomorrow, along with putting the interior back in it. I will tack on the price of the idol control valve and labor if its not sold today.
Message me for more pics of her. I want this thing gone ASAP.
CLEAN VINS MATCHING VINS CLEAN CT TITLE
(203) 460-7079 Call or text my name is Eric.
eh9 jdm b16 
Comment