b16 turbo oil line...

[foxkevin89]

were would i tap into an oil source for my oil line for my turbo on my b16a2???:confused:
i found the sender unit but there is no oil line around were the filter goes or were the sender is. i need to find the place to tap the line into for my oil pressure gauge and my turbo oil line. any help would help

[single slam 12]

get a sandwich plate or get a 3 way brass fitting where the oil sending unit goes. fairly inexpensive.

[foxkevin89]

i have the 3 way fitting that came with my peakboost kit. the sending unit on the back of the motor next to the oil filter u mean right? theres not oil line back there just a few wires going into the unit. and what about the oil pressure gauge? i have done this before but i totally forgot cause it was like 2 years ago.

[single slam 12]

seems to me you got it all i'll see if i could get a pic and post it.

[nemisish20]

Kev hit me up i can come show you how and where it all goes man !

[single slam 12]

hope this helps

[allmotorRyan]

bump for some good pics

[203CARTEL_John$]

get a sandwich plate or get a 3 way brass fitting where the oil sending unit goes. fairly inexpensive.

I had a sandwich plate but chose not to use it, I was told their known to leak, not to mention u have to deal with it every time you do n oil change

[jdmcivic1994]

just use the brass fittings into the oil pressure sending unit un screw it and put all your fittings on and tapp off that and screw back into the block should work mint man thats how i had my setip worked fine for me g/l