built gsr for turbo

[gsr95]

i built my bottom end with 9.0.1 compression JE pistons and eagle rods some head work and i put a str manifold on .. my car idles at about 500 rpms do you think that it needs to be tuned out ? ived tried messing with the timing to make sure it was right if anyone could give me some suggestions thanks

[pizzaboy720]

i built my bottom end with 9.0.1 compression JE pistons and eagle rods some head work and i put a str manifold on .. my car idles at about 500 rpms do you think that it needs to be tuned out ? ived tried messing with the timing to make sure it was right if anyone could give me some suggestions thanks

if u already havent have daves tuning alternatives tune your car im one of his happy customers and if you want your car to run right and actually last have him tune it

[daveedd357]

i built my bottom end with 9.0.1 compression JE pistons and eagle rods some head work and i put a str manifold on .. my car idles at about 500 rpms do you think that it needs to be tuned out ? ived tried messing with the timing to make sure it was right if anyone could give me some suggestions thanks

Those intake manifolds like the venom manifolds don't have the right passages for the IAC to work correctly. I have experience in getting the to work. let me know

[Herminshs]

i built my bottom end with 9.0.1 compression JE pistons and eagle rods some head work and i put a str manifold on .. my car idles at about 500 rpms do you think that it needs to be tuned out ? ived tried messing with the timing to make sure it was right if anyone could give me some suggestions thanks

The car need to be tuned before you blow it up. Call Dave and you will see the difference, I guarantee it.

[it0sls203]

imeediately get the car tuned by a reputable tuner. The most important aspect of any engine build whether n/a or turbo is the tune. Do not mess with the timing at all, let the tuner deal with that during you session.

[louie74]

Have a brand new turbo for that t3/t4 ball bearing hit me up 2032963027