CEL And Fuse Help

[Jovanni91Da]

I started having a problem with my interior fuse

Example interior lights, radio, clock, door ajar sound keeps popping after like 2 minutes. I put a new fuse in and the same thing happens. I've pulled the radio out and no wires are exposed or touching and it's not the cigarette lighter because nothing plugged in, so this is real mind fucking me right now idk what do look for next

As for the check engine light I've had it one for about a 8months-1year nowidk what the codes throwing but I know I need my o2sensor plugged in put also was thinking if I plug that and it's still on due to it being swapped could it throw a code from that

Any input or help on this would be appreciated

[Jovanni91Da]

Bump

[Jovanni91Da]

Ttt

[Jovanni91Da]

Bump help please

[Jovanni91Da]

Bump

[daddieyankee32]

it could be a short.. very strange. As for ur cel, wat obd is the motor?

[ej1 sleeper]

it could be a short in ur fusebox jova. as for the CEL you know your gonna always have a cel, you a have obd2 swap in a ef with a custom harness. your best bet is bypassing it.

[thatnikkatito]

ttt

[daveedd357]

Light is most likely on for o2 sensor.

[jealous1shateric]

U have a short

[egkid129]

Theres a short somewhere, get a multi meter n check continuity..

[Jovanni91Da]

Thanks fellas and at nando yea man I know just tired of looking at it now, but like ej1 sleeper said i have obd0 converted to obd1 with an obd2 motor

[the jdmchop]

As for your fuse problem, try eliminating stuff one at a time, pull radio, if pops pull, interor light, and soforth untill u get some where!

For ur cel. Jump it an see wat codes u have then work from there! U can can have any obd motor or chassis and if done properly no cel.

[B16eg6]

As for your fuse problem, try eliminating stuff one at a time, pull radio, if pops pull, interor light, and soforth untill u get some where!

For ur cel. Jump it an see wat codes u have then work from there! U can can have any obd motor or chassis and if done properly no cel.

I was going to say the same thing. Read the code, and replace whats bad. I had an obd0 engine in my EG and i put an obd0 LS in my buddy's 00 EK.

Take your time and you will get it all sorted out. If you need to jump to code allyou need is a paper clip.

[Jovanni91Da]

How do jump to code?