question

[Jerley]

anybody know how im going to go about swaping a obd1 ls motor into my obd2 integra? looking for some good advice

[94eg4dr]

Should b just a straight drop in assuming you have everything mounts,harness,t bracket,axles,motor and trans etc...and if you know what you are doing when it comes to cars or you could pay someone to do it

[Jerley]

Should b just a straight drop in assuming you have everything mounts,harness,t bracket,axles,motor and trans etc...and if you know what you are doing when it comes to cars or you could pay someone to do it

woahh lol my bad obd2 integra lol

[94eg4dr]

Ohh lol still just straight drop in but will need a step down harness from Obd2 to obd1

[Jerley]

Ohh lol still just straight drop in but will need a step down harness from Obd2 to obd1

would i use the wire harness off the ls?

[|Noob|]

all that changes i believe is the distributor plug and like 2 other plugs

[efadict23]

most of the plugs are the same but all you gotta do is take anything from the obd2 motor that the obd1 is either missing or is different and put it on there...you can run the car with your stock ecu as long as all the sensors are correct and your useing the obd2 intake mani...if not then get a jumper so you can use the obd1