Window problem

[honda4civic]

Hi ctv need help with my driver side window does not roll down
By the switch i know for a fact that is not the window motor
Because i put direct power and roll down then invert the cables
And roll up now i thouht it was the switch but change that and
I still got the same problem i check all the fuses everything its aight
Can somebody tell me what can be my problem

[94eg4dr]

well if everything is good u should check to see if power is going to the motor if not you may have a wiring issue...i personally have seen broken wires in between the door and body where the harness goes through....do all the other windows work fine???

[honda4civic]

Yes i can roll down the passenger window from my side at
First i though it was the driver side window switch so i changed
But with the new one does the same thing roll the passenger
But not mine i cheked all the fuses everything is working

[jdmkid618]

Did this Jus happen or its been there???

[honda4civic]

It was perfectly working just one day stop and thats it not
Even advice that it was gettin bad just stop working

[94eg4dr]

U need to see if u got power at the motor when moving the switch up or down if u don't have power u have a problem from where the power comes out of the fuse box to the door broken wire,bad ground etc good luck

[egboostin6]

check the wires and pins in the harness that clips into the switch panel. id bet that the pins in the harness clip became loose.

[sicksnwbrdr7@aol.com]

if ur gettin power.. maybe the track is bent or something causing it to get stuck?? just my 2 cents