obd0-> obd1 vtec

[70stunt]

Ive looked for how to do the wiring but cant seem to find anything.
I need to know how to wire in a obd1 b16. i no it has something to do with a jumper harness and a 4 wire o2 sensor or something like that. Need the help.

[blk_cd7]

Ive looked for how to do the wiring but cant seem to find anything.
I need to know how to wire in a obd1 b16. i no it has something to do with a jumper harness and a 4 wire o2 sensor or something like that. Need the help.

what are you wiring? what kind of car is it in?

what i think your trying to say is your putting a obd1 b16 in a ef with 2 injectors right?

[sikauto1]

Im not really understanding you either. I just did my b16 into my 91 integra (obd-0). I could prolly help but need to kno what car its goin in, do you have the jumper harness ect

[blk_cd7]

Im not really understanding you either. I just did my b16 into my 91 integra (obd-0). I could prolly help but need to kno what car its goin in, do you have the jumper harness ect

well the b16 into the da is pretty simple...but putting it into a civic is a little more tricky...this dude needs to let us kno a little more about what he's doing or we cant help him

[CTgoldhatch]

www.Rywire.com that have all the jumpers needed to make it plug and play i have on in my crx now

[70stunt]

91 civic with a mpfi swap done with injector resistor box, i need to go to obd1 b16

[LS/Vtec]

it's easy.injector clips, dizzy plug, 4 wire o2 knock sensor, vtak, solder all the resistor box wres together or a dead en cap plug off a obd1/2 harness. Im prolly forgetting something. buy the obd0 to obd1 jumper harness for the ecu and it will have a pig tail come off of it all color coded wires and a diagram that will tell you which wire is which.

[jealous1shateric]

I say convert ur whole car to obd1 runs way better .. Go to local junky and fin the harness off an ex .... Or buyy my gsr int harness and find a motor harness

[blk_cd7]

it's easy.injector clips, dizzy plug, 4 wire o2 knock sensor, vtak, solder all the resistor box wres together or a dead en cap plug off a obd1/2 harness. Im prolly forgetting something. buy the obd0 to obd1 jumper harness for the ecu and it will have a pig tail come off of it all color coded wires and a diagram that will tell you which wire is which.

nuff said...piece of cake...trust

[panch]

rewiring completly to obd1 is a pita, even if the car is dpfi i rather wire everything up my self...

To wire vtec, ground the black wire from the oil pressure switch to the block, then wire the blue one to pin D6, and run the vtec solenoid to a4

[70stunt]

thank you

[asimo]

Ive looked for how to do the wiring but cant seem to find anything.
I need to know how to wire in a obd1 b16. i no it has something to do with a jumper harness and a 4 wire o2 sensor or something like that. Need the help.

It is very simple. What you need is OBD1 Dizzy, Dizzy jumper harness, ECU jumper harness, OBD1 ECU, 4 wire o2 sensor and thats pretty much it. Its plug and play really with the exception of plugging off one of your o2 bungs and putting in the new dizzy.

There has to be a million write ups on this via google.