Announcement

Collapse
No announcement yet.

what can it be.?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • what can it be.?

    Hey i have a problem here wit my car...well on friday i was on the highway and out of nowhere i felt the steering wheel pull tool the right very soft then one hard pull to the right ever since friday its been doin it some days worse than others...it wont do it every time i start driving but it does it alot idk what can it be i changed inner outter tie rods nd pass side caliber everything else seems to be in good shape...no its not an alignment!
    The pull is very hard tho..and it happens when accelerating nd when i press brakes it does it somtimes..

    Anyone know what it is? Help me out need this fixed! Its driving me crazy...keep this up top nd wit helpful info thanks

  • #2
    my shit used to do that,i ended up changin the cv axle,but you say you did the inner tie rod's

    you should get an aligment if you havent
    9-3-12 Legendary IG thatsmrmycocksafloppintoyou

    Comment


    • #3
      Check your LCA bushings. I had the same problem and my inner LCA bushing was fucked.
      Money ain't a thing! Crew Member #1

      Stock LS Papa!

      Comment


      • #4
        Originally posted by LS/Vtec View Post
        Check your LCA bushings. I had the same problem and my inner LCA bushing was fucked.
        Will do ill let you kno how its lookin tomorrow hopefully thats it man

        Comment


        • #5
          check brake hoses for kinks...low tire pressure even..busted strut..go thru all tha basics b4 spending hella cash

          Comment


          • #6
            My DA did that once turned out to be frozen caliper
            http://i1252.photobucket.com/albums/...1/118c94a0.jpg

            Comment


            • #7
              Originally posted by LS/Vtec View Post
              Check your LCA bushings. I had the same problem and my inner LCA bushing was fucked.
              this would be my best bet as well.. esp because you say it happens under accelerating and braking
              BACK FROM THE DEAD

              FUNCTION > FORM

              Comment


              • #8
                Bleed your brakes, might be an air bubble stuck up in there, also see if you have a spare brake hose and toss that on there while you're at it.
                Honda sucks. Over priced junk.

                Comment


                • #9
                  If u have stock traction bars coming from cross member onto the lower control arms make sure this are tight because I had this dame problem wit my old d.a and it ended up being that

                  Comment


                  • #10
                    Could be one of the calipers going bad .I've bump into situations were a previous owner decided to change brake pads on one side but not to the other side so when pressing the brakes the car Would pull to one side .it would do the same if the caliper is frozen
                    Originally posted by knuckk
                    @jdmdikk only dude i would take advice from.

                    Comment


                    • #11
                      Caliver was frozen so i thought changing them would fix the problem.....but it didnt change a thing

                      Comment


                      • #12
                        I need somone to help me out...it stopped doin it for a while and started back up need this fixed asap hmu pm me

                        Comment


                        • #13
                          Bump hmu 2038502181 need this fixed

                          Comment


                          • #14
                            Originally posted by WAngel View Post
                            check brake hoses for kinks...low tire pressure even..busted strut..go thru all tha basics b4 spending hella cash
                            x2.

                            For it to happen suddenly tho, makes me think brakes.

                            Comment


                            • #15
                              a kinked brake line or something alike seems like its it.

                              Comment

                              Working...
                              X