Need some help with camber kit.

[isaiahdegracia]

Need to take off those bushings to put them on my camber kit.i tried with one wrench and wouldn't budge. Then ran out off time And had to go to work. If I used 2 wrenches would it be 100 times easier?? I tried buying it from autozone but they don't know if the one they found is the right one. So that failed. Well has anyone done this to their car??? Or does anyone have these buShings and bracket or know where I can get it? Thanks

[isaiahdegracia]

Bump

[isaiahdegracia]

Upppp

[SeanJDMJohn]

Use a 12mm socket on the nut side nd another closed end wrench on the bolt side spray the nut side with on blast wait a few mins should come right off

[SeanJDMJohn]

Also the nut side on your upper lca r both in the inside

[isaiahdegracia]

Thanks. I'll try that.

[Bwahhhh]

ttt

[SeanJDMJohn]

It might be 14mm I forget but either way spray that bitch nd loosen from the nut side