itr suspension on my stock crx si , need help asap

[93sihatch]

itr suspension on my stock crx si. need help asap
Hey ctvtec I need real help no guessing,


I have a 91 crx si that I'm keeping the motor stock , but I bought a five lug conversion, I understand the whole machining thing I also need a place that does that, but I was told me itr 32mm axle splin won't fit with the stock crx si axle.


Please help I need real facts, and a place that can machine my hubs thanks.

[93eg2sol]

To my knowledge it should fit if u have 32mm 5 lug... where did u get the suspension ?

[*Kung Fu panda*]

Hit up naisbest13203 he did the same conversion on his old kswaped crx si

[93eg2sol]

Problem is if its a Jdm 5 lug its 36 mm axles then u have a problem... if its 32 mm u good...

[Bang Bros]

also make sure you change your stock front lca's to integra lca's if not your front tires will have negitive camber

[93sihatch]

also make sure you change your stock front lca's to integra lca's if not your front tires will have negitive camber

That's one thing I never heard of. I was just gonna get a camber kit for the front and rear.

Ok so all Honda 32mm splines are the same on the axle.
Now I just need a place to get them machined with my da spindles

[93sihatch]

Hit up naisbest13203 he did the same conversion on his old kswaped crx si

His name never came up.

[Bang Bros]

That's one thing I never heard of. I was just gonna get a camber kit for the front and rear.

Ok so all Honda 32mm splines are the same on the axle.
Now I just need a place to get them machined with my da spindles

i say it cus i put gsr disk all around on my 88 crx hf and i guess the stock lca's are shorter than integra lca's so my front tires looked crazy so i changed them to integra lca's and it was perfect

[93sihatch]

Just Google it same size length, only difference is where the tractionbar whole goes