clutch pedal adjustment?

[ManTyme]

ok I have an eg ex coupe when shifting it feels like its hard to get into gear like I have to force it in... and when shifting it doesn't feel smooth like it should you can feel it pop out when you shift from gear to gear....

Here is what I've tried so far:

Changed tranny fluid
Loosened the bolt that holds the short shifter

I was told I probably need to adjust the clutch pedal because it grabs extremely low

Mind you my car was auto and I swapped it to 5 speed so I believe it has something to do with the pedals adjustment...

Any1 have any input?

Any1 know how to adjust the clutch pedal? Lmk I need it done asap

[Jroc860]

Bleed the clutch first.

[ekrican77]

ask yomo... hes good wit clutches... dats 1 think i dnt know nething bout i hate dat shyt.. lol

[SeanJDMJohn]

Well if u look under ur dash where the clutch master pins into the pedal assembly there is a bracket with a nut on the back side loosen the nut take out the pin twist the bracket to the desired length u want the pedal assembly to sit at the pit the pin back in then tighten the nut back up nd then see if ur clutch grabs the way u want BUT FIRST BLEED UR CLUTCH AGAIN ND IF U NEED PIX OF THE BRACKET ND PIN ND SHIT I GOT U

[ManTyme]

Bump any1 know how? Help me out CTV!

[ManTyme]

@ jroc I bled the clutch b4 I put it back on the road.... forgot to put that..
@smokey joey tell yomo to call me I lost his # ill pm you my # to give him
@sean john honestly I read the wite up to do it with pix and all but I got confused smh I rather have some1 that knows how to do it, do it 4 me.... and like I told jroc I bled the clutch Saturday b4 it got back on the road

[ManTyme]

@ jroc I bled the clutch b4 I put it back on the road.... forgot to put that..
@smokey joey tell yomo to call me I lost his # ill pm you my # to give him
@sean john honestly I read the wite up to do it with pix and all but I got confused smh I rather have some1 that knows how to do it, do it 4 me.... and like I told jroc I bled the clutch Saturday b4 it got back on the road

[B16eg6]

Where you located? I can come fix that issue for you.

If it isnt the pedal it may be internal in the trans.

Hard to get into gear doesnt mean the pedal isnt traveling enough to fully depress the pressure plate.

If the car is a single, those trans are notorius for having issues with not going into gear.

Hit me up 203-215-8996.

[SeanJDMJohn]

Where you located? I can come fix that issue for you.

If it isnt the pedal it may be internal in the trans.

Hard to get into gear doesnt mean the pedal isnt traveling enough to fully depress the pressure plate.

If the car is a single, those trans are notorius for having issues with not going into gear.

Hit me up 203-215-8996.

X2 nd bro if u still tryin to get those corners I'll help u with the pedal while ur down here just leme kno

[ManTyme]

I txt you b16eg6

[ManTyme]

I don't think its the tranny cause it doesn't grind or pop out.. and the car it came out of had no issues of the sort

[leo2006leo]

That happened to my bro four door he needed a new tranny
But try changing clutch master cylinder or slave clutch

[kurbs]

I got a single clutch / tanny if u end up needing either

[CTgoldhatch]

Stick your head under the dash on the rod for the clutch there is a adjuster nut

[SeanJDMJohn]

Stick your head under the dash on the rod for the clutch there is a adjuster nut

Thats what I said nd he read the write up on it but he want someone to direct him in the right direction meaning he wants someone to come to him nd help him first hand so let's get him some help ppl