H22 help

[cheapo23]

I need someone thats very familiar with preludes i swapped out the h23 for the h22 just need some help on finishing need vtecwiring done have skunk 2 intake that needs to be finished if anyone knows anyone or if anyone on here is good with preludes let me know

[Inline4]

Year of prelude and the h22 swapped into it?

[cheapo23]

Year of prelude and the h22 swapped into it?

Its a 92 prelude h22 obd1 swap

[Inline4]

Go to the junk yard there should usually be preludes there pull the engibe harness and ecu and then your car will be plug and play as for the intake manifold buy a stock manifold off someone then swap over the missing parts

[cheapo23]

Go to the junk yard there should usually be preludes there pull the engibe harness and ecu and then your car will be plug and play as for the intake manifold buy a stock manifold off someone then swap over the missing parts

I have the harness and ecu

[Inline4]

so your good to go if you have the vtec engine harness

[92smokeaccord]

to find the si vtec harness is a rare find..your best bet is to just wire up the vtec and vtec pressure.
- Vtec solenoid: Pin A4
- Vtec pressure switch: Pin D6