air in clutch system...

[accord9483]

since it got cold in the last couple days my clutch been acting up.. i have fluid in trans. very clean.. i change clutch slave on trans mission and fire wall about 5 months ago.. i looked at fluid and it was alittle low and dirty.. .... anyone have any special way to get air out of system or to keep it from acting up...???

[ManTyme]

bleed your clutch

[sean-john]

bleed your clutch

X2

[CTgoldhatch]

Beeld you clutch after you bleed it and try some more some times it is hard to get it all

[crzycivic93]

bleed your clutch

x3 go at it for a good 25 mins, and dont let your reservoir get low while ur bleeding it. If the little screen is dirty, clean it. If that dont work, then u got bigger issues.. G/L

[accord9483]

it drives fine just if im at a stop light or at idle i have to force it in alittle and clutch pedal it low... so imma try to bleed it with the machine at work or should i do it manually..

[Epics Coupe]

I use a break bleed tool for the same problem my level was low dirty and had air in the lines. I removed all the old fluid and put some fresh fluid in and then use the tool to bleed the line. It work great with out having to pump the shit out of the pedal and got all the air out of my whole system in like 5min you can rent it a Autozone for free

[accord9483]

i have one here at my shop works off compressor.. so imma try it later when i punch out...

[accord9483]

I bled the system.. And inspected my slave cyclinder.. Found my cluctch pedal assemble has 2 cracks on the bracket where it bolts on to in the fire wall.. I need cluthc pedal assembly.. Any body have a accord for parts......