Brake help!!! No pressure

[hondaek]

Yea I'm Gona replace the whole caliper and for from there. Hopefully after a few bleeds the problem will be solved..
Thanks for the help guys it's nice to know there are people willing to help

[Accordboy97]

you definitely could bleed brakes from the lines. but if you still have no pedal after bleeding you could have a bad brake hose or a small leak somewhere that your not seeing. check all the lines from the master to each caliper and look for leaks.

[hondaek]

Yea I still have no pedal, and replaced the caliper with the broken bleeder...
The caliper that had uneven brake pad wear, when I bled it fluid didn't squirt out, it seeped out very slowly.... Barely anything came out,
U guys think the caliper is bad or bad hose connecting to caliper?

[testify]

Was air coming out?

[hondaek]

No just fluid slowly coming out from underneath bleeder screw, I thinking maybe replace brake hose?

[H22SteakSauce]

No just fluid slowly coming out from underneath bleeder screw, I thinking maybe replace brake hose?

Yes

[hondaek]

Any suggestions after that if it doesn't work? I assume the caliper is still good? Maybe not?... Or maybe a better bleeding job from a shop will do

[hondaek]

Any suggestions after that if it doesn't work? I assume the caliper is still good? Maybe not?... Or maybe a better bleeding job from a shop will do

[hondaek]

So I replaced the hose.. Air bled out. I got pressure back... Now the pedal is firm but slowly sinks to the floor. I'm assumed master cylinder went bad? Any other suggestions ?

[testify]

Yes, likely a bad master, but could be the slave also.