Need help with swap

[Jayvte-c]

Hey Ctv I'm swapping out my hatch and need help

I have a B18c1 bored Out 2 a 85mm with J.e pistons eagle rods / crank a lot of stuff

b16 head semi built

First question what head gasket will I use I was thinking on a b20 but I don't know because b20 I think is 84mm

And should I use a block guard on this build or leave it as is

Thanks Ctv

[Jayvte-c]

Btw I'm asking about block guard because I'm boosted

oh And Btw

does Anybody Know if it's safe breaking a car in on the dyno ?

[lowcruzinteg4]

itd blow up theres an actually break in period of reving and idleing and such do research google is your friend alot of people of this site dont even know what a torque wrench is

[Jayvte-c]

itd blow up theres an actually break in period of reving and idleing and such do research google is your friend alot of people of this site dont even know what a torque wrench is

Yea you might be right I was just thinking there might be one person who knows what there doing lol

[Coolio]

Don't fuck with block guards. I've heard nothing but bad news from them. Warped cylinder heads and them breaking. Your best bet is to sleeve the block of your bord out to an 85. I'm pretty sure you can order an 85 mm head gasket online.

[Jayvte-c]

Will anything happen if I don't sleeve it I'm running 9-0 pistons

[Jayvte-c]

I seen a couple head gaskets online but wasn't trying to wait long

[egjay]

I would get golden eagle head gasket. I personally don't like block guards . If u get one . Make sure it's installed at the proper depth and don't force it in. 85mm on stock sleeves. Seams like a time bom to me. Good luck with build.

[redbubb74]

Wit 85mm on stock sleeves the walls are going to be thin. The headgaskrt u can get online but for the block wit 85mm pistons I say get the block sleeved

[Jayvte-c]

How much do they usually charge to sleeve the block because I really don't want this build to blow up in my face especially since it's turbo

[testify]

How much do they usually charge to sleeve the block because I really don't want this build to blow up in my face especially since it's turbo

A good set of Darton sleeves will set you back $600 + machining.

[redbubb74]

A good set of Darton sleeves will set you back $600 + machining.

It's a set back but shit its worth the money u put into it extra insurance feel me deff worth it

[Jayvte-c]

It's a set back but shit its worth the money u put into it extra insurance feel me deff worth it

I see them here but they say wet or dry and that thru me off lol

[Jayvte-c]

Wit 85mm on stock sleeves the walls are going to be thin. The headgaskrt u can get online but for the block wit 85mm pistons I say get the block sleeved

Took Out My crank Last Night Only To See The Block Was Already Sleeved :D <----- My Face when i seen The sleeves lol

My Only question Now that i Already orderd My cometic Gasket Will I Still be Able to rev 9500 or no since The Block is borded Out that wide

Also brought My Eagle crank To machine shop guy said its bad but fixable Anyone Know of a machine shop near waterbury were i can get a second opinion