Just look

[Inline4]

just take a look at this
this guy was argueing that he put a z6 head on a dohc zc block but didnt explain how then this is all he says

pics in a sec

[B16eg6]

For what it is worth,

http://lmgtfy.com/?q=single+cam+ZC .

http://forums.clubsi.com/ubbthreads.php?ubb=showflat&Number=32489#Post32489

It can be done. Practical.. NO.. but it can be done somewhat easily.

[testify]

Z6 on a ZC is fairly common.


Guess your trolling thread didn't work out the way you expected.

[kevin]

Z6 on a ZC is fairly common.


Guess your trolling thread didn't work out the way you expected.

first time ive ever heard of this lol

[testify]

first time ive ever heard of this lol

And youve never haerd of people swapping ZC heads onto D16 and D15 blocks either I suppose?

[93integra]

lol...fail

[kevin]

And youve never haerd of people swapping ZC heads onto D16 and D15 blocks either I suppose?

ive heard of that. not completely clueless.

[testify]

The ZC and Z6 shortblocks are the same. The difference is in the heads.

[EJ8-Type R]

Lol

[Inline4]

yea z6 head will work on sohc zc block but to put a z6 head on a dohc block takes a good amount of machine work smh

[LS/Vtec]

yea z6 head will work on sohc zc block but to put a z6 head on a dohc block takes a good amount of machine work smh

a zc motor is a sohc block with a dohc head

[Inline4]

a zc motor is a sohc block with a dohc head

so why dont the head bolts line up? also the zc bolts are 11mm x 1.5 and sohc is 10mm x 1.25 like i said it takes a good amount of machine work to do that and there is a sohc zc vtec which is compatible with the z6 and the d16a1 sohc head fits a dohc zc block same as vise versa

[testify]

so why dont the head bolts line up? also the zc bolts are 11mm x 1.5 and sohc is 10mm x 1.25 like i said it takes a good amount of machine work to do that and there is a sohc zc vtec which is compatible with the z6 and the d16a1 sohc head fits a dohc zc block same as vise versa

Because the head bolts do line up.

[Inline4]

No they dont

[testify]

No they dont

What planet are we on?

Don't answer that. Your answer would scare me.

What you posted claiming the head bolts dont line up are actually numbers that represent the diameter and pitch of the head bolts, and the threads in the block.

Just use ZC headbolts for a ZC block or Z6 headbolts for c a Z6 block or go to McMaster Carr or Fastenal and get literally any bolt you want.

The holes, do line up.