Flywheels resurface?

[BBV S2K]

Any good and cheap of course place to get it done here in Bridgeport?

its a Honda flywheel and the surface to re-polish is about 1 1/4''

if that makes a diff... never changed a clutch before so I dont know how that works

[BBV S2K]

no one?

[B13 SE-R]

i used 60 grit on my old sentra fly wheel came out okay for what it was.

[BBV S2K]

so.. you telling me to do it myself? wasnt that easy to take out.. what about if I dont do it correctly and have to take it out again lol

[TypeSHLude]

center auto machine shop in stratford will do it for like $50-$60

[94-civic-coupe]

ive done a few clutches where i just hit it with sandpaper 80 grit then 120 on a da it's always worked fine for me. i also did one on a brake lathe one time didnt come out so good but functioned fine. be carful if u use a da not to take off to much material but just to freshen up the surface u can use a mic to make sure u dont have lots of high and low spots.

[B13 SE-R]

ive used the sand paper meathod,it works cheap fuctional and still grabs like it should :D

[BBV S2K]

Center auto did it for $60

[jdmdikk]

I've done the sandpaper way without any issues. I have also taken my flywheels to don scintos in Stratford Ct .he charges $40