??ls vtec??

[goldeg]

wat should i do to make a above average every day driver? TO the block?? To the ecu? rev limit at? every thing?? can any one help make suggestions

[highoutputauto]

well you need to start with the block, pistons rings rods and all new bearings are a good start, blockgaurd good but not necessary, head studs head gasket, GET THE CAR TUNED most important step to the longevity of your engine, type r oilpumps are always nice, possibly bigger fuel injectors and the tuner will answer all the rev limit and launch control answers you have while you are tuning, you can do all the engine mods you want but without a good TUNE it means nothing.head work is nice for power but not needed to insure longevity so basically cams, port polish valves springs retainers and intake/throttlebody combination is pretty much what you want.

[goldeg]

sould I use a aftermarket head gasket? and arp studs I have gsrs in a b16 head? stock bottom end internials are finen? y the block guard?

[highoutputauto]

stick with a oem honda gasket arp head studs, arp rod bolts are a plus if you plan on reving high, the block guard is just that, a guard, its a piece of mind when you are putting a heavy load on your engine, keeps everything steady. but still i thought in your original post you said you wanted somthing better than just a daily driver hense the internals of the block which will be in there for the long haul, BUT REMEMBER THE TUNE IS KEY WHEN YOU ARE READY YOU CALL DAVE (dave tuning alternatives 860-805-0968) he will make sure the tune is on point.

[DrZfInEsT]

If your going LSVTEC the best set up would be GSR head,LS block,B16 Tranny.Go from there.

[eginsnaityjdm]

look on b20vtec under engine building, really good sticky on how to build an lsvtec right....

[single slam 12]

i wouldnt recomend sending him to another site for one we got a very good reputible shop gaz giving advice and we also got a very good tuner dave for his tune guys if we could keep it in the site it's allways going to be better for us thats like if you post something for sale and some jerk tells the people interested in your stuff go to this other site they got it cheaper that aint cool

[eginsnaityjdm]

i was just letting him know, because its a complete walk through, unlike anything on here..... tryin to help him out...

[single slam 12]

thats cool but sending people to other forums have caused problems before and there have been people banned for it just tryin to keep people on the forum and let them know whats cool and whats not but if he asked gaz i'm sure he could give him details and insight on how to get it done