need help asap obd2-obd0

[y8beast]

my boy jus got a ef hatch and a y8 wat needs to be done to for this motor to work in an ef it was wired up already for an ls possibly ls vtec not positive but was and ls please help need it tonight if possible

[crzycivic93]

dizzy, injectors, IM, alternator, starter, all need to be obd 0

[y8beast]

dizzy, injectors, IM, alternator, starter, all need to be obd 0

y cant jus get a jumpr harness and run obd1 on it and jus have to wire the vtec

[y8beast]

bump help me out peepz

[CTgoldhatch]

Easy way is with a jumper harness but since it is a y*8 you have to use a y8 dizz the z6 don't line.up so if you rewire the y8 dizzy to obd1 plugs and get a rywire obd1 conversion it will be plug and play

[y8beast]

Easy way is with a jumper harness but since it is a y*8 you have to use a y8 dizz the z6 don't line.up so if you rewire the y8 dizzy to obd1 plugs and get a rywire obd1 conversion it will be plug and play

god look and if i got a eg clutch pedal and the slave and all that i could swap it over to hydro tranny

[ctvtechondaman]

buuuummmp for this help^im the one that ownes 91 hatch wit da y8 motor lets get it y8 beast...only problem is its a cable tranny shell??

[y8beast]

bump for good help

[CTgoldhatch]

put a cable in it with the y8 motor. that is the easy way you can convert the whole car to hydro but then you need to buy a conversion mount and conversion clutch pedel cost you like 500 to do it better off buying a cable Si tranny