anyone interested in doin an auto to manual swap for a friend?

[injen78]

ive got a friend who wants to do auto to manual in a 2000 civic..id do it but im not doin that shit in the cold lol. anyway let me know if you or someone you know is willing to do this..he will provide all the parts and cash for labor.

[ManTyme]

I can do it. I've done it to my eg... but how much he tryin to spend? Its a lot of work lol and I need more details like does he already have a full manual swap? Or is he using the stock motor and I would have to swap out the torque converter etc for clutch flywheel etc lmk pm me

[LS/Vtec]

Hit me up n lmk. Im down.

[CTgoldhatch]

i will do it take about 2 hours

[evo-mentalites-cc]

i will do it take about 2 hours

i wanna see that

[ManTyme]

Lmfao yea ctgoldhatch you stuntin... did you even do your wifes red coupe yet?

[LSJDMTEG]

Bump cuz mr nice guys suppose to do mine this weekend wel c how n if it goes down. Also im gona order the auto to manual mount

[injen78]

I can do it. I've done it to my eg... but how much he tryin to spend? Its a lot of work lol and I need more details like does he already have a full manual swap? Or is he using the stock motor and I would have to swap out the torque converter etc for clutch flywheel etc lmk pm me

hes gonna provide everything needed to do the swap.hes using the stock motor in the car.

i will do it take about 2 hours

yea you must smoke alot of crack.

[ManTyme]

Ok well does he already know what he needs?

He will need

Clutch
Fly wheel
Pressure plate
screws from a 5speed setup
Tranny
Clutch lines
Slave cylinder
Master cylinder
Pedals with all the pins and screws

Lmk and is the auto swap still in the car?

[ManTyme]

Ok well does he already know what he needs?

He will need

Clutch
Fly wheel
Pressure plate
screws from a 5speed setup
Tranny
Clutch lines
Slave cylinder
Master cylinder
Pedals with all the pins and screws

Lmk and is the auto swap still in the car?

[CTgoldhatch]

how any i smokeing crack i did it on 1997 ex coupe in 3 hours with some one talking to me and half hour break to eat. and i have done it befor in the same time. when i am in my shop alone i work very fast sohc cam motor swap in a ex when it was auto took 3 1/2 hours.. its all good tho pay some one more to do it that takes longer.

[vtecboost]

4 grand ill do it in 5 hours..just because i need 4 grand to fully pay off my first lift i bought lol....honestly i like automatics over stick and ill tell u why....when ur draggin u can tune ur automatic to shift perfectly and theres no chance for human error..i duno about you but im sick at driving but ive fucked up a few times at the track...tell ur friend to get a built automatic trans...tune the ecu to shift at whatever it desires if this is a track car..not to mention u ever try and spray meth and nos while shifting//???? i usually pre meth after heating up my tires to keep the heat down then meth the whole way while spray at 2nd gear...my best time in my old gen 1 was 10.40 134 with only 425whp ..im not a pro but just a pref...

[CTgoldhatch]

4k is a good deal and sould just have the auto built lol

[injen78]

i know for a fact it does not take you 2 hours to do auto to manual unless its hacked to shit..
youve gotta take the trans off,put the new trans on,take the pedal assembly off and put the new one on,then do the linkage,which youve gotta do cutting and shit underneath.wiring and all that.im not dumb.and i know you charge retarded for your stuff.ive got someone that is going to do it for fairly cheap and in one day(which is good enough time),that i know and trust fully with all my parts,cars and my friends stuff. i could care less how much it costs cuz its not my car or my parts.

[MYeg'sALLMOTOR]

Bump g/l