spun bearing fix help!!

[jdmkain1706]

Ok so my y8 has a spun bearing i was just wondering could i just change the bearings or do i have to get the crank re surface 2

[jdmkain1706]

Lmk guys trying to find a cheap y8 but cant find one for cheap so lmk

[jdmkain1706]

Buuuuuuuuuump

[evo-mentalites-cc]

is the rod or crank burnt

[latinman07]

if the crank is ok then you don't have too

[jdmkain1706]

i dont know i didnt check it yet ima take it apart today the motor ceased already though is it still possible to fix?

[LS/Vtec]

If it seazed then ur cranks gotta be shot. It's easier/cheaper to buy a new motor honestly.

[evo-mentalites-cc]

If it seazed then ur cranks gotta be shot. It's easier/cheaper to buy a new motor honestly.

x2

[jdmkain1706]

ook thanks bros

[CTgoldhatch]

the prob is you can changer the bering and or the crank and that is not always the issue the d16y8 has known oiling issues so most likely it will happen again. the oil pump is weak in them and the oil ports are small and shitty. get your self a z6 and do the crank sensor jumper and run that