D Swap Questions??

[LS/Vtec]

I took out my B and am puttin in a D to get thru emissions. Now my questions are...

-Will the sohc axles outta the eg work on my ek?

-What T Bracket do I use because the one that came with my swap outta the eg doesn't line up.

-Will the shift linkage outta the eg work into my ek?

Like i said i've never rly messed with D's so an help would be appreciated. Thanx!!!

[injen78]

yes the axles will work..get the tbracket from an ek..linkage should work

[LS/Vtec]

Ok cuz axles wouldnt go into the hub. I'll try putting grease on em. And shift linkage didn't line up but im assuming because i had no back mount in so the motor need to be tilted towards the front from the top to gimme more length on linkage. Shits a *************** doin it all by myself.

[injen78]

might need diff. axles..
i thought all dseries axles were the same..

[jrsc_b18c1_12psi]

what year is the engine and what year is the car

[injen78]

the motor is going into an ek hatch..96-98 ..d15b obd?

but whats the differance of the car and motor??

[jrsc_b18c1_12psi]

the 96+ d+b motors have the crank position sensors mounted on the oil pump without that sensor which is only mountable by swapping to a newer style pump you will pop a cel code and fail immediatly

[injen78]

ohok..his is 92...

[LS/Vtec]

the 96+ d+b motors have the crank position sensors mounted on the oil pump without that sensor which is only mountable by swapping to a newer style pump you will pop a cel code and fail immediatly

http://www.ff-squad.com/technet/ckftrick.htm

Worked fine with my ls like this above.

[injen78]

Nice!!!