Obd2 swap help!!!????

[civic8891]

Heres the deal: I have a 99 ex civic obd2b and i blew the motor. I got a motor out of a 98 ex obd2a. both are d16y8s. I put the new motor in and everything hookup up except the distributor. i switched the distributor from the 99 motor to the 98 that i put in the car. I tried starting it and it turns over just wont start. also im hearing some like popping or clicking sound from the ecu. can any help or know what i need to do to get this to work??? thanks

[Jdm Kingz]

are you running the obd2b ecu.. and make sure the wires on the distributor are right the wire sequence is 1,3,4,2

[2o3EG6]

poppin and clicking for the ecu? dont kno about that but if its popping for ur exhaust its definitly ur firing order

[POS civic]

are you running the obd2b ecu.. and make sure the wires on the distributor are right the wire sequence is 1,3,4,2

yea i was running the obd2b ecu and the obd2a distributor idk if this would work. i switched wiring harnesses, everything over to obd2a and that didnt work either

[203CARTEL_NeiL]

why you running a obd2a dizzy why not just use the original dizzy?!?! also make sure you didnt pop the ecu fuse.

[civic8891]

so i should have the obd2b wiring and dizzy in correct?

[H23VTECLUDE]

so i should have the obd2b wiring and dizzy in correct?

Yes, you should have used all the Electronic Components, & harness from the 99 OBD2b motor, onto the 98 OBD2a motor, then dropped it in.

If you still need help hit me up (860)519-9387, My name is Kyle