helllllllp I don't know wats wrong wit my car

[jdmkain1706]

Yo I jus put a new clutch in my car and it was straight 4 a lil while then it jus stop going into gear wat could it b???????and there is something wrong wit my throttle cause wen I jus tap THE gas and it revs and stays at 3000 rpm and if I press the gas harder it will rev but won't go back down it would stay where ever it revs 2 wat could that b???

[doitpropa]

i think the revving is ur tb. or gas cable fraid or sumthin but the clutch sucks umm if u try to push it into gear wut does it do? like my boy broke a spring out of his oem replacement nd it kinda worked like a hydrostatic lawnmower .. like go to push in gear nd the car jus started to roll a lil

[jdmkain1706]

It stays in neutral when I try to put it in gear I checked my clutch cable and it has a hole in it could it b that?

[doitpropa]

try pullin on your cable the side at the tranny see if the metal will jus pull out its possible u snapped it

[jdmkain1706]

I checked it but It looks ok wat could it b??

[boostedhks]

this is oddd, did u broke in the clutch man ? or where you beating on it as soon as you put it on ? a clutch is supposed to be broken in for at least 500 miles after you install it.

If u were burning out already and stuff like that without the correct breaking in procedure i believe you may have messed up ur clutch springs, also if u didn't tied the flywheel bolts to specs (14 ft/lbs of torque) u might of gotten one of those loose and it might of fell in the transmission prohibiting then that you get the car into any gear.... my suggestion, take the transmission apart (it's a d-series, it only takes like 1 hour to take it apart) and check everything out, as of the idling, check your aicv, throttle body and throttle body cable as well.

When you have done this, please let us know what happens. Also take some pics of the clutch or tranny when u take it out if possible so we could see the real thing instead of just trying to imagine what it should be or look like.

[jdmkain1706]

Nah I never beated on it at all yet lol but I think its that little thing dats wit the clutch cable on the block wat they call that???

[doitpropa]

the cable holder? if so i think i got one u can have if u make the drive out here dunno how it could b broke or w.e. though

[jdmkain1706]

I dunno ill figure it out

[atirado84]

yeoo check for vacume leaks for the high idle..and for the tranny do you have any tranny fluid in it?? could of spill a majority of it out while doing the clutch

[jdmkain1706]

I put tranny fluid in it though and the car is reving like it is cause of the throttle cable is fuk up I gotta change it

[jdmkain1706]

Now I gotta figure out y its not goin into gear

[PinoyDelSol]

Alright, Sounds to me like you have a damage Clutch Slave Cylinder. Check to see if you are leaking brake fluid/Clutch fluid off of the slave cylinder. Just move the black boot and touch the inside if its wet or let a friend step on the clutch to notice any fluids leaking.

[jdmkain1706]

I found out wats wrong wit my car I took off my tranny and found out it was broken and I need a new throttle cable thanks 4 ya help I need a d15 tranny and a throttle cable lmk ctv

[ThePunisher]

i have a crx si tranny pm if u wanna buy it