I really didnt want to do this

[jrsc_b18c1_12psi]

sounds like the stub that the hub assembly rides on is bent stop arguing and let the pics speak for themselves if it is bent it was most likely an accident

[5LugEk98]

If u look u can see its bent

[jdmcivic1283]

I really dont care what ne 1 thinks about me cause none of yall pay my bills

lol like x2

[sikciv666]

Installed it wrong. Neil a good dude he doesn't play people

im sure neil has another set..

[203CARTEL_NeiL]

Okay so i just got out of work was gonna hit this guy up.. but now im good. People really dont know how to wait. But anyway i sold him the rear disc that i was going to install in my EK. Never installed it cause im sellin the EK.. had it sitting around forever so when I seen him inquiring i told him about it. The rear disc came off my boy's coupe that was perfectly running. It got parted out cause he couldnt get the title. I pulled it out myself. Regardless I met up with this guy had me basically teach him how to install it.. mind you in the hot ass weather. then he looked like he was going to back out of the deal after waitin on him to decide wether to purchase it.. again in the hot ass weather. Then he thoroughly inspected everything and asked me about each and every part, nut and bolt of the system.

Anyhow, i seen the car running that i took them off of. I know they were fine when i had them. So how the fuck do i know it didnt get messed up during installation? All i gotta say is SOLD AS IS. You inspected it and still decided to buy it. You can keep this thread going IDGAF cause ive dealt with 75% of the people in this site and im never had a bad deal. Sold tranny's computers and motor's with just my word to back it up and never had no problems. Its the first time someone thinks otherwise since the site has been up. Everything i sell is quality you can ask the 1000 ppl ive dealt with on this site alone.

[shooktd]

neil is ya boy

[5LugEk98]

okay so i just got out of work was gonna hit this guy up.. But now im good. People really dont know how to wait. But anyway i sold him the rear disc that i was going to install in my ek. Never installed it cause im sellin the ek.. Had it sitting around forever so when i seen him inquiring i told him about it. The rear disc came off my boy's coupe that was perfectly running. It got parted out cause he couldnt get the title. I pulled it out myself. Regardless i met up with this guy had me basically teach him how to install it.. Mind you in the hot ass weather. Then he looked like he was going to back out of the deal after waitin on him to decide wether to purchase it.. Again in the hot ass weather. Then he thoroughly inspected everything and asked me about each and every part, nut and bolt of the system.

Anyhow, i seen the car running that i took them off of. I know they were fine when i had them. So how the fuck do i know it didnt get messed up during installation? All i gotta say is sold as is. You inspected it and still decided to buy it. You can keep this thread going idgaf cause ive dealt with 75% of the people in this site and im never had a bad deal. Sold tranny's computers and motor's with just my word to back it up and never had no problems. Its the first time someone thinks otherwise since the site has been up. Everything i sell is quality you can ask the 1000 ppl ive dealt with on this site alone.

word sold as is ok cool i got u FUCK YOU AND EVERYONE ON THIS SITE THAT THINKS IM WRONG U KNOW THAT SHIT WAS FUCKED UP N U BEAT ME ITS ALL GOOD KARMA IS A MOTHERFUCKER

[rhd_integra91]

okay so i just got out of work was gonna hit this guy up.. But now im good. People really dont know how to wait. But anyway i sold him the rear disc that i was going to install in my ek. Never installed it cause im sellin the ek.. Had it sitting around forever so when i seen him inquiring i told him about it. The rear disc came off my boy's coupe that was perfectly running. It got parted out cause he couldnt get the title. I pulled it out myself. Regardless i met up with this guy had me basically teach him how to install it.. Mind you in the hot ass weather. Then he looked like he was going to back out of the deal after waitin on him to decide wether to purchase it.. Again in the hot ass weather. Then he thoroughly inspected everything and asked me about each and every part, nut and bolt of the system.

Anyhow, i seen the car running that i took them off of. I know they were fine when i had them. So how the fuck do i know it didnt get messed up during installation? All i gotta say is sold as is. You inspected it and still decided to buy it. You can keep this thread going idgaf cause ive dealt with 75% of the people in this site and im never had a bad deal. Sold tranny's computers and motor's with just my word to back it up and never had no problems. Its the first time someone thinks otherwise since the site has been up. Everything i sell is quality you can ask the 1000 ppl ive dealt with on this site alone.

church!!!!!! To this

[redjdmdc2]

Okay so i just got out of work was gonna hit this guy up.. but now im good. People really dont know how to wait. But anyway i sold him the rear disc that i was going to install in my EK. Never installed it cause im sellin the EK.. had it sitting around forever so when I seen him inquiring i told him about it. The rear disc came off my boy's coupe that was perfectly running. It got parted out cause he couldnt get the title. I pulled it out myself. Regardless I met up with this guy had me basically teach him how to install it.. mind you in the hot ass weather. then he looked like he was going to back out of the deal after waitin on him to decide wether to purchase it.. again in the hot ass weather. Then he thoroughly inspected everything and asked me about each and every part, nut and bolt of the system.

Anyhow, i seen the car running that i took them off of. I know they were fine when i had them. So how the fuck do i know it didnt get messed up during installation? All i gotta say is SOLD AS IS. You inspected it and still decided to buy it. You can keep this thread going IDGAF cause ive dealt with 75% of the people in this site and im never had a bad deal. Sold tranny's computers and motor's with just my word to back it up and never had no problems. Its the first time someone thinks otherwise since the site has been up. Everything i sell is quality you can ask the 1000 ppl ive dealt with on this site alone.

Not bashing anyone but I think Neil and I are one of the top sellers on this site and neither sold bad parts to anyone I got pages of vouches and alot of street cred behind my name.. So I gotta say you probaby did it wrong since you didn't know what you were doing in the first place.. And next time at least talk to the person before making worthless threads like this because this is how drama gets started.. " Real Talk"

[JDMFRO95]

bump cus neil is a good guy and i bought part off him no bs and no problem. in pic it dont look bent to me mabe dust sheld is but, if you had rotor and caliper on it and it spins nice like no wobleing and what not its not bent you would see that right away. mabe you just need a hand putting them on. have some one pysicly come over and help you that has done it befor mabe thats alll you need bro. g/l

[5LugEk98]

There is no way i bent that it was in a accident there is no way i would have seen that until i pulled off the rotor assembly

[JDMFRO95]

ok all im saying is when you spin it how does it look????

[kayslay]

Okay so i just got out of work was gonna hit this guy up.. but now im good. People really dont know how to wait. But anyway i sold him the rear disc that i was going to install in my EK. Never installed it cause im sellin the EK.. had it sitting around forever so when I seen him inquiring i told him about it. The rear disc came off my boy's coupe that was perfectly running. It got parted out cause he couldnt get the title. I pulled it out myself. Regardless I met up with this guy had me basically teach him how to install it.. mind you in the hot ass weather. then he looked like he was going to back out of the deal after waitin on him to decide wether to purchase it.. again in the hot ass weather. Then he thoroughly inspected everything and asked me about each and every part, nut and bolt of the system.

Anyhow, i seen the car running that i took them off of. I know they were fine when i had them. So how the fuck do i know it didnt get messed up during installation? All i gotta say is SOLD AS IS. You inspected it and still decided to buy it. You can keep this thread going IDGAF cause ive dealt with 75% of the people in this site and im never had a bad deal. Sold tranny's computers and motor's with just my word to back it up and never had no problems. Its the first time someone thinks otherwise since the site has been up. Everything i sell is quality you can ask the 1000 ppl ive dealt with on this site alone.

might sell alot of good parts out here but deff swore on a b16 block he sold me that ended up being blown...not the most honost dude...just sayin

forcedbseries...not kayslay

[JDMFRO95]

i cant realy see it your talking about the threaded shaft right?

[5LugEk98]

i cant realy see it your talking about the threaded shaft right?

yea u can see it in person my wife that dont know shit bout cars noticed it