Idle driving me insane!!!help...

[jdmjuni]

could it be the thermistor in the air intake temp sensor?

no i connected it last night and its still doing it, i think im going to try and swap my throttle body or burn the ************ing car...lol

[H23VTECLUDE]

hey whats up guys i just swapped a 2000 ls in my whip and i am going to go boost, BUT i had to do the iac valve conversion bc its an ek,had to go from a three wire to a two wire and my car is idling high then drops thens raises then drops, once it warms up it stops, any info would be greatly appreciated ....p.s. i had the iac checked it was good and i had a complete coolant flush done.

i have the same problem, i have not a clue

yo i got the same prob....no cel codes either

bump 4 u, got the same problem man cant stand it, it only does it sometimes for me

To all of you that have the Idle Surge Problem, PM me with you contact info. & I will get back to you on how to fix this issue, or I can come fix it for you for a small fee.

[jdmjuni]

To all of you that have the Idle Surge Problem, PM me with you contact info. & I will get back to you on how to fix this issue, or I can come fix it for you for a small fee.

pmed

[jdmjuni]

Bump

[jrsc_b18c1_12psi]

just pull the flap off the fast idle valve and screw the white part back in its an easy fix

[doitpropa]

i had that prob. till the other day my tps was goin bad switched it then its tarted loping switched it back 2 more times cleaned iacv nd the fitv was tight idk wut i did to fix it actually but its fixed lol

[jdmjuni]

bump

[ParadiseEg]

Possible solution...

I had the same issue when I first swapped my engine. Remove the IACV, remove two screws this is just a cover. In there you will find a white piece which you will have to screw in. Once all the way in, turn it again counter clockwise one full turn. Reinstall Valve and you should be all set as long as there aren't any air pockets in your cooling system. Let me know if this helps.

[H23VTECLUDE]

I had the same issue when I first swapped my engine. Remove the IACV, remove two screws this is just a cover. In there you will find a white piece which you will have to screw in. Once all the way in, turn it again counter clockwise one full turn. Reinstall Valve and you should be all set as long as there aren't any air pockets in your cooling system. Let me know if this helps.

Correct repair procedure, just wrong name. Your talking about the FITV (Fast Idle Thermo Valve)