Helpp!!gsr swap in ek hatch

[Lsvhatch]

Ok so two things i need some help with first of all whats this green connector under the dizzy?oil pressure sensor??and how come my stock harness doesnt have a connector to plug into it? Do i need a gsr engine harness..i was told my stock harness would work


And my second problem is the throttle cable is way to long...is there anyway to make it work or do i need a diff throttle cable if so which one? 99-00si??

[94eg4dr]

That green plug is the vtec pressure switch and I think you need a gsr throttle cable
Was the swap in the car before a vtec swap?

[H22SteakSauce]

U can use ur stock harness. If u don't have that plug ur harness is missing it. And u can use ur stock throttle cable it'll just be long and ugly lol

[Lsvhatch]

Mi single cam didnt have that going to the vtec solenoid n still cracked...ns whats the right throttle cable to get?

[turbo-sohc 380WHP]

Mi single cam didnt have that going to the vtec solenoid n still cracked...ns whats the right throttle cable to get?

i would go to dealer and buy a oem civic si. donno if its the same part number but its only around 43 bucks

[V8-KILLER]

no ek hatch came with a vtec motor. you can re use the stock harness. but you should give it to someone who knows wtf they are doing and have them wire in vtec lol. or go online and look up how to do it.

[Lsvhatch]

The single cam i just pulled out is vtec..its a jdm d15b

[doitpropa]

because jdm motors use a 1 wire vtec solenoid nd jus move the bracket over that holds throttle cable and use one bolt

[Lsvhatch]

Ty ill give that a try in the morning with the bracket..and doing some research about pressure switch...my jdm engine did t have one its just a safety precaution...just trying to figure out how to bypass it now

[LS/Vtec]

You need a GSR throttle cable. You can not move the bracket over and use 1 bolt because you're running a stock GSR intake manifold, If you had a aftermarket intake manifold you'd be able to do that. The green plug is the oil pressure switch for vtec. You'll have to wire in the plug or get a ex harness for your correct year either obd2a (96-98) or obd2b (99-00). And then just extend the vtec wires. I would pay someone who knows what they are doing to do it instead of you trying yourself.

[doitpropa]

my bad with wrong info on bracket thats how all my cars are didnt think a gsr was diff sorry to op and thanks alex for not flaming me

[EJ8-Type R]

You need a GSR throttle cable. You can not move the bracket over and use 1 bolt because you're running a stock GSR intake manifold, If you had a aftermarket intake manifold you'd be able to do that. The green plug is the oil pressure switch for vtec. You'll have to wire in the plug or get a ex harness for your correct year either obd2a (96-98) or obd2b (99-00). And then just extend the vtec wires. I would pay someone who knows what they are doing to do it instead of you trying yourself.

x16363636373873635536388575

[Lsvhatch]

Im using a 99 ex harness..i have a couple extra connectors that were never hooked up in my jdm single cam but ther are all in the back of the motor none near the dizzy