Announcement

**H23VTECLUDE** · 02-10-2009, 05:40 PM

Do you have your Timing Right? Do you have your valve clearances set? Do you have compression? Let us know.

**JDM8o9** · 02-10-2009, 05:55 PM

relay ? ecu?

**Mr Layy** · 02-10-2009, 06:13 PM

check all the grounds. top ground, tranny ground, thermostat ground

**Bsickteen** · 02-10-2009, 06:38 PM

If the motor has been sitting for a long time the cylinders may have become dry and the rings are not sealing, check to see if you have compression.

**forcedbseries** · 02-12-2009, 01:24 PM

Originally posted by H23VTECLUDE View Post

Do you have your Timing Right? Do you have your valve clearances set? Do you have compression? Let us know.

ok so ive been messin with it and aint gettin anywhere...

-i checked the main relay for the 3 clicks ...good
-timing is right
-did not check compression yet
-as for valve clearence the head came off of the running car and just sat for a lil while and went back on
-all fuses are good
-i have spark and fuel through the fuel rail
she cranks but wont start...at times will give a lil hint that it wants to but thats it

**forcedbseries** · 02-12-2009, 01:27 PM

Originally posted by Bsickteen View Post

If the motor has been sitting for a long time the cylinders may have become dry and the rings are not sealing, check to see if you have compression.

i just put the whole bottom end together to the haynes book specs but didnt check compression yet

**wankel88** · 02-13-2009, 04:20 PM

Sounds like the firing order to the dizzy is wrong!

**forcedbseries** · 02-13-2009, 04:40 PM

Originally posted by wankel88 View Post

Sounds like the firing order to the dizzy is wrong!

i went over it a few times and the firing order is right...and i also have taken the fuel injectors out and they all spit fuel. am also trying a brand new dizzy and have the same problem

**H23VTECLUDE** · 02-13-2009, 07:26 PM

Compression? Valve clearances?

**forcedbseries** · 02-13-2009, 07:32 PM

Originally posted by H23VTECLUDE View Post

Compression? Valve clearances?

havent checked the compression yet and im not sure how to check valve clearence but the head wasnt touched when i took it off not sure if that matters

**BurnAll4S4** · 02-13-2009, 07:56 PM

so check the compession.

**forcedbseries** · 02-15-2009, 12:39 PM

no compression rings werent seating ...shes runiin thanx fellas

Announcement

car wont start...

car wont start...

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment