Need help and advice

[ls94civic]

ok here is the deal...
just picked it up for 1500.

i just picked up a 1991 crx si with a jdm obd0 b16a. I bought the car for the motor for my 2000 civic ex. so basically i want to take the d16y8 and put it in the crx to resell and take the b16a and put it in the civic ex. My questions are
1. what will i need parts wise to put the b16 into the civic?
2. what will i need parts wise to put the d16y8 into the crx?
3. what kind of wiring am i going to need to do for the crx?
4 what kind of wiring am i going to need to do for the civic?
5. Should i swap the b16 to obd2?
I work in a garage so i have the space and tools to do what i need to do.
I have swapped before but i haven't swapped obd0 to obd2
thanks for the help

[ls94civic]

so i did a little research and this is what i found...
b16 into 2000 ex i need

99-00 civic si
ecu
dizzy
t bracket
driver side motor mount?
94-01 teg
axles
shift linkage

Does that look correct?
what am i missing?

[CTgoldhatch]

you need
99-00 SI T bracket and mounts
99-00 SI shift linkage
integra axles or 99-00 SI axles
99-00 SI ecu
you will also need to do a crank sensor bypass because that motor will not have it
you can run the stock EX harness
and you will mee a 99-00 SI dizzy.

also you will need a hydro trans or talk to nice guy about swaping your cable trans guts in to a hydro case.

[CTgoldhatch]

to put the Y8 in the crx

you need cable trans
sohc axles
sohc crx or hatch shift linkage
you can use the harness that is in the crx.
you need some obd0 injectors
obd0 dizzy
obd0 ecu
and mounts

[ls94civic]

you need
99-00 SI T bracket and mounts
99-00 SI shift linkage
integra axles or 99-00 SI axles
99-00 SI ecu
you will also need to do a crank sensor bypass because that motor will not have it
you can run the stock EX harness
and you will mee a 99-00 SI dizzy.

also you will need a hydro trans or talk to nice guy about swaping your cable trans guts in to a hydro case.

so other than switching the injectors from b to d and bypass the crank sensor and use obd2 b dizzy and alt will everything else plug and play with my ex harness?

[ls94civic]

to put the Y8 in the crx

you need cable trans
sohc axles
sohc crx or hatch shift linkage
you can use the harness that is in the crx.
you need some obd0 injectors
obd0 dizzy
obd0 ecu
and mounts

i have decided to not go this route.. will be selling separately

[gsr17y]

your such a ricerr

[EJ8-Type R]

your such a ricerr

Lmao

[V8-KILLER]

should have just bought a b16a2 swap lol

[high on ej6]

Make it look stock and keep the crx it looks pretty clean besides the rice kit

[ls94civic]

your such a ricerr

thanks d bag

[SeanJDMJohn]

Make it look stock and keep the crx it looks pretty clean besides the rice kit

It looks like a mugen kit kinda from the side

[gsr17y]

thanks d bag

your welcome dick lick