What hea gasket for lsv

[16 BLOCKS]

Are you talking aboit bore size or because oil hole or what I dont get what you say I always use the head gasket for the block the I got if its b20 or ls but if the block its at 85 mm I use 85mm head gadket if its 82mm I ise 82mm head gasket,,,likE I just dont get what you trying to explain have you ever build a ls/vtec or b20/vtec ? Because I tho the if you use a gsr head gasket on a b18b/A block with a vtec head I will leak oil thats what I tho

i did many many always use b16 or gsr gasket never leak....leaking is from when u mill head and and dowel pin is too tall ..stopping the head from clamping properly..

[el abusador]

im going to use the blackworks one becuse is worked from factory

[JDM8o9]

use cardboard ..serves as a spacer and adds +3hp ..foshizzle

[VtecVentry]

I used a cometic gasket thats is made for the conversion

[toddmsc]

i have the same exact setup... use an oem honda b16 head gasket! ive ran mine no problems. all these other people saying LS gasket are misleading..you ALWAYS ALWAYS ALWAYS ALWAYS (cant stress enough) use an OEM OEM OEM OEM head gasket that matches the head!!!!

the others may work but from my experience b16 head gasket on a b16 head for lsv works MINT no leaks no overheating no problems.

[el abusador]

Word but the golden eagle Is not for ls or b16 is for ls v so it should be better

[93supercoupe]

i always used a GSR gasket

81 and 81.5mm bores use the same gasket

[nerko]

Bump