b series throwout bearing question

[jdmek97]

wats gud ct im wondering if all b series throwout bearing are the same? can they be interchangeable for ls to b16/gsr? tryna finish my swap and pickd up a b16 tranny witout the throwout and wen i bought it for a b16 the bearings seems too small. any input will help thanks

[LS/Vtec]

They are not all the same. It really depense on the clutch fork.

[jdmek97]

ite thanks bro

[efadict23]

i know that cable and hydro are def diff.....but if its too small make sure they didnt give u a single jingle one by mistake

[jdmek97]

i know that cable and hydro are def diff.....but if its too small make sure they didnt give u a single jingle one by mistake

i bought the clutch fork brand new at honda for a b16 and went to a couple auto parts store and askd for the throwout for a 99 b16 tranny n they are all the same but its too small. i bought the tranny bare and was told it was a hydro b16 thats y im wondering if the bearing is interchangeable. lmk ppl need helpp any advice is welcomed need to get my shyt out!! lol

[94EJ1OwnS]

Bumpp cause im having the Same Problem , Went to Autozone to get a ThrowOut bearing , & figure out the throwing bearing was either to big or Small , but didnt fit , So we hadda reUsed the old one which i had no Choice !

[jdmek97]

^^ im saying its a bitch n its the only thing that i need to get my shyt out!!

[cts mr.niceguy]

? random never really seen a difference. u bought the fork from honda u shoulda grabbed the tbearing while u were there. i have like 7 forks here and there all the same from a ls to a b16 to a gsr

[jdmek97]

^^goodlooks bro

[joel4890dejesus]

I have a 2000 si with the original b16 hydro tranny....i bought a throwout bearing today and it was too small for the shift fork....im going to try getting a 2000 gsr hydro throwout bearing tomorrow to see if it fits...i looked up the schematics for the bearing on a honda website and they list 2 different bearings for the b16 hydro tranny...Part# 22810PLW005 and part 22810RPF003....good luck i hope this helps

[H22SteakSauce]

I have a 2000 si with the original b16 hydro tranny....i bought a throwout bearing today and it was too small for the shift fork....im going to try getting a 2000 gsr hydro throwout bearing tomorrow to see if it fits...i looked up the schematics for the bearing on a honda website and they list 2 different bearings for the b16 hydro tranny...Part# 22810PLW005 and part 22810RPF003....good luck i hope this helps

That's weird. Usually I put my throw out bearing on my clutch fork. Lol bump for part numbers

[jdmek97]

I have a 2000 si with the original b16 hydro tranny....i bought a throwout bearing today and it was too small for the shift fork....im going to try getting a 2000 gsr hydro throwout bearing tomorrow to see if it fits...i looked up the schematics for the bearing on a honda website and they list 2 different bearings for the b16 hydro tranny...Part# 22810PLW005 and part 22810RPF003....good luck i hope this helps

Good looks bro I actually tried gettin one for a 00 n had the same prob so I ended doing sum research n the ls tbearin is actually bigger. So I went wit the ls one n fit perfect! Bump for part numbers n if u try those n don't work mayb u wanna try the ls tbearin! Bump!!!