Vtec Malfunction(Code p1259) Need Help!

[crzycivic93]

change the solenoid, an let us know

[94EJ1OwnS]

^^ i really Don't Want to change the Solenoid (its not the money issue) it'd the whole issue that , the reason why it'd prolly saying that code becuase it'd leaking oil , so ima try to get that fix & see if the code goes away if not ima change the solenoid

[94EJ1OwnS]

Put power n ground to the solinoid to see if it clicks

Im a Noob , so im not gonna try to blow myself up lol'd , i get somebody to do it'd for me

[93supercoupe]

for a leak to be the cause of that code, it would have to be leaking alot of oil/pressure. The leaks not your problem. its the wiring/valve. Like suggested before, put power and ground to it. It will idle different if it does engage.

if it works, than start tracing the harness, or run a new wire.

[94EJ1OwnS]

for a leak to be the cause of that code, it would have to be leaking alot of oil/pressure. The leaks not your problem. its the wiring/valve. Like suggested before, put power and ground to it. It will idle different if it does engage.

if it works, than start tracing the harness, or run a new wire.

The Engine harness is New , So i knoe the wires aint bad on it'd , && im not leaking alot , it'd a little but it'd not stopping , but im might juss end up change the whole solenoid . .

[Santi]

for a leak to be the cause of that code, it would have to be leaking alot of oil/pressure. The leaks not your problem. its the wiring/valve. Like suggested before, put power and ground to it. It will idle different if it does engage.

if it works, than start tracing the harness, or run a new wire.

All you have to do is put the green:yellow wire to ground right?