car wont stay on now

[EG_Luny]

So I got everthin but map sensor connected (there's no. Plug for it) & the car starts & stays at 2rpm then after bout 10-15 seconds it turns off by its self

[SeanJDMJohn]

Ohh man there is always a plug for the map tps all that send me a pic of ur harness nd I will let u kno if all the plugs r there also mayhem ur putting the plugs on wrong

[93eg2sol]

Maybe the tps and map are backward....

[jdmjunkie9753]

Your hatch is a 92 the MAP sensor plug isn't on the harness its on the fire wall. Does your throttle body have a MAP sensor on it? If the harness was never tampered with before then its pretty idiot proof to plug something in the wrong spot because the split loom is only long enough to get to where it has to be. If something looks like its stretched or is hard to reach somewhere you have it plugged into it probably shouldnt be there. The best way to put the harness in is to start from the driver side by plugging in the 2 plugs by your clutch master cylinder and connecting your alternator and work your way to the passenger side one plug at a time. Dont jump around from place to place youll end up plugging things in the wrong spots if you dont know what your doing.

[EG_Luny]

Map isn't there! Guys!

[ej1 sleeper]

bump.

[EG_Luny]

bump.

Thanx bro

Yo
I hit up Spoon860 & asKed him to paint my bub....so I wuldnt have to rattle can it

[93eg2sol]

Ur map is on the firewall... and u need to plug it in...

[EG_Luny]

Ur map is on the firewall... and u need to plug it in...

On my old harness the map is on there....

[93eg2sol]

Sounds like u got a mess over there ... I had a 92 hatch and the map was on the firewall.... u should try and look for it....

[EG_Luny]

Sounds like u got a mess over there ... I had a 92 hatch and the map was on the firewall.... u should try and look for it....

It wuldnt be diff since its si? Idk I can't find it

[93eg2sol]

Try takin off the wipers and the cover and c if they hid it back there...