What's CEL reading?
Announcement
Collapse
No announcement yet.
Misfire?.. NEW PROBLEM
Collapse
X
-
still throwing same code #14 which is IACV and i pulled the injectors and one is missing the little screen and 2 look different than the other 2 is that supposed to be that way? the bottom near the nozzle 2 are bulkierR.I.P Nick Haines
NHSwaps13203
R.I.P John Ruggiero
203CARTEL_John$
Comment
-
Originally posted by game2o3 View Postyooo, u sure its not electrical?PinoyDelSol
Comment
-
im thinking its the injectors since one looks hacked the f up! i cleaned them up threw them back in the problem isnt as bad as it was yesturday so im gonna order a new fuel filter and put that in and see what happens and see if i can find some cheap injectors for now.R.I.P Nick Haines
NHSwaps13203
R.I.P John Ruggiero
203CARTEL_John$
Comment
-
lmao!.... im done for the day car runs ok at idle drove it and doesn't stutter like it was yesterday. yo i got a 09-10 foglight oem honda only one tho bracket is broken but the lens is good and still has bulb $20 if you need it.R.I.P Nick Haines
NHSwaps13203
R.I.P John Ruggiero
203CARTEL_John$
Comment
-
Originally posted by KILLERFERIO413 View PostSound like the module inside the dizzy is bad.... My car was acting the same way.. Shit would back fire and act up bad between 1-4000 rpm untill i changed it.... Get a new dizzy or module and u should be good...R.I.P Nick Haines
NHSwaps13203
R.I.P John Ruggiero
203CARTEL_John$
Comment
-
my 98 gsr was doing the same thing, look at the ground wires that go to the thermostat housing if they loose connection they the throw a random misfire code and case the motor to bog like its gonna stall then it takes off. the way i found it was i had the car running and i pushed on the intake pipe it moved the harness and it stalled i just kept moving the wire harness around till i found it. hope this helps GL
Comment
Comment