obd2 gsr, wont hit vtec. CEL is on for tps and iac, going to change those soon but what should i do about my vtec? i think my solenoid cap is cracked noticed some oil would that cause my vtec to not hit?
Announcement
Collapse
No announcement yet.
no vtec?
Collapse
X
-
not to sound dumb but try with seat belt on because with out it mines is like that if i pass 5k in my sohc it wont go on but if i put my seat belt on it it works its wired i think it would work if all lights are off in the cluster like cel and brake like and belt light some cars are wriedmr.snuggles to you bitch
Comment
-
#1 check the oil, VTEC works off oil pressure so check that first
#2 Make sure your car is warm or VTEC won't operate as efficently
#3 Check that solanoid! U said oil was leaking make sure it didn't mess up the wiring, I've seen some hack jobs on that with tied up wiring and tape!
#4 Make sure that ECE is a P72 ECU, it will say it on the side.
#5 Change the VTEC solanoid gasket, it may be leaking oil and there is a screen in there that can get plugged up and not allow oil in, its like 12 bucks from Honda and a 30 min job at most if it's being done by a one handed mentally disabled monkey :d lol!
Hope this helps cause everyone needs VTEC in thier life! :)Last edited by teggygsr; 04-13-2011, 03:36 PM.
Comment
Comment