Please Someone Help Me!!!!!! B Series In Side!!!

[Rla_Eg6]

guys i have a problem not sure of what it is!!! so you guys know i dyno's it! ok well i got a lil too happy and decided to throw type r cams in. at first car seemed to be running fine well at first bad so i set fuel pressure down! on the street ran hard on highway sosososo sluggish! so i decided to take it back apart in the garage i found timing was off! so i put the car in timing set the fuel at 48lbs with the vaccumm off now when i bring the rpms up slowly when vtec engages all is does is sputter HARD! and when i punch the throttle down itll open up but keeps puttering and the car feels held back like crazy!!!! please any help will be appreciated

things i was thinking fuel pressure still to high or low! misfiring maybe bad plugs!!! can it possibly still be off timing! damn i got a headache lol

[PhrequenC]

timing dude. def

[Rla_Eg6]

but i did redo it putting the fucking allen keys in the holes in the cams and shit im stumbled

[sikciv666]

try setting your fuel pressure back to stock and see what happens..

...44PSI

[Rla_Eg6]

ok im gonna do that now 44 psi! brb in a few!

[ONE-CAM-EF]

good luck tito..get that shit running hard...

[highoutputauto]

i would check and make sure the o ring on the camcap is in and didnt fall out the one in the center.

[daveedd357]

Check the valve lash. very important. I like to hear my valves at work.

[PhrequenC]

whats the update tito is she running yet

[ONE-CAM-EF]

bump for tito's whip....is it all good nigga?

[Rla_Eg6]

ok heres the SIt. i turned my fuel pressure down to about 44 or 45psi now i let the rpm come up slowly to vtec and it engages pretty clean! but now if i stomp on it what it does is it feels held back and sputters! i pulled my plugs and they looked like dark greyish idk if i fouled them out from what my fuel pressure was high! omg man im stressed please help! and i never checked for that o ring what can it cause if its not in there!

[daveedd357]

if i stomp on it what it does is it feels held back and sputters!

It may be running lean. Call when you have the time. David

[Rla_Eg6]

iight calling!

[alscrx]

I would check my timing. Make sure cam timing is good as well as ignition timing.

Also is it throwing any codes? Any CEL???

Sounds like when my dizzy went bad

[khmboostedeh2]

My timing was never right when I aligned the holes in the cams with the caps.

IIRC, doing that puts both camgears off by a tooth. Try turning both cams counter-clockwise by a tooth.