Announcement

Collapse
No announcement yet.

b20vtec no start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • b20vtec no start

    whats goin on ctvtec i got a b20vtec and it wont start...i got spark and fuel...it pops and back fires once in a while...any suggestions plz feel free 2 let me know..thanks..

  • #2
    check the spark plug wires make sure you connect them right

    Comment


    • #3
      Do u have aftermarket injecots if so how big are they u might be flooding the spark plugs.. Or if u have a regulator turn it down to 32-40 psi check timing make sure its not off a tooth or 2
      D and G auto member #5
      98 EJ6 SOHC slow & 2011 ruckus

      Comment


      • #4
        sounds like firing order is off
        mechanical timing could also be off a degree or 2 as stated below. start with firing order then check timing and make adjustments if needed

        Last edited by mark11017; 12-11-2010, 05:37 PM.

        Comment


        • #5
          Check timing
          J-ROC TUNING
          R.I.P NHSWAPS 13203
          FUCK FRIENDS!!! crew member #1

          Comment


          • #6
            If you have spark and fuel it must be the ECU or firing order.

            No CEL?

            Apply it!

            Comment


            • #7
              check the timeing , cause i had this civic that was starting with back fires but it turning on , so i took off the head and it was off timing so i say check timeing

              Comment


              • #8
                ok so i checked timing and it was a lil off fixed it and still nothin...it was making a blump sound...its turnin over good..idk..its probally something stupid..

                Comment


                • #9
                  ok well i checked the timing it was a lil off so i adjusted it..still no fire...wen crankin over it was makin a bluomp sound..idk wut else it could be...the ecu worked with my last swap and my old car b4 this 1..

                  Comment


                  • #10
                    sell it to me...
                    Follow me on instavtec @steaksauce

                    Comment


                    • #11
                      naww got alot invested into and if i sell if i wont get cclose 2 some money bak ..i juast wanna figure it out...

                      Comment


                      • #12
                        u need a macanic if u need on pm me

                        Comment


                        • #13
                          it the head build ??
                          :cool:

                          Comment


                          • #14
                            meaning springs and valves and retainers
                            :cool:

                            Comment


                            • #15
                              the head went on the way i bought it from est motorsports..never touch anything on the head...there good guys there..but idk i hope nothin wrong with it...

                              Comment

                              Working...
                              X