Vtec killers

[mark95]

Does any1 no about the todga vtec killer cams and how they perform... How do they compare to skunk 2 cams

[mark95]

.......

[P-CRIDER]

If you want to drive this car on the street dont waste your money on them you dont need them...sk2 makes a good cam

[redjdmdc2]

If you want to drive this car on the street dont waste your money on them you dont need them...sk2 makes a good cam

Ya man with the toda vtec killer cams, when you start your car its already in vtec at idle lmaoooo. Youtube it and here how they sound, sounds like a fucking mustang lmaooo. Skunk 2 stage 2 cams are good enough if you want better go stage 3 but those are some aggressive cams lmaooo

[b16eg684]

agreed with both above cams...vtec killers are basically "race" cam...they will wear down your retainers extremely fast if you daily your car. and if you do run them then you better have high compression or a big bore, EXCELLENT valvetrain, plenty of fuel, and a great header/intake manifold

[mark95]

So skunk 2 pro3 are better then the vtec killers cuz I pro 2s but I was considering the 3s

[kbrown!]

honestly for a street driven car tuner series cams are fine i think anything big than the pro 1's are for sunday drivers or racecars

[SamN]

All motor right? First off, what compression are you going to be running?
These cams were designed for road race classes where vtec isnt allowed. They are also strictly a race cam for 5000+ you will have no low end power. You also wont make more power than vtec cams. I beleive they use roller rockers too. Toda shit is overpriced anyway if you were really looking into cams like these your best bet is ferrea roller rockers and custom cams.
The benefit of these are for track cars seeing a very high powerband to 10k and above. The rollers take the beating alot better than a normal vtec cam rocker setup would. Alot of the high hp boosted guys use these setups (9second cars) and I've also seen a few verrrry built N/A track cars with them.
I guarentee you dont have setup that would capitolize on the benefits so stick with off the shelf vtec cams. Skunk 2 pro cams are a great choice. Which ones to go with depend on your compression/setup.

[b16eg684]

All motor right? First off, what compression are you going to be running?
These cams were designed for road race classes where vtec isnt allowed. They are also strictly a race cam for 5000+ you will have no low end power. You also wont make more power than vtec cams. I beleive they use roller rockers too. Toda shit is overpriced anyway if you were really looking into cams like these your best bet is ferrea roller rockers and custom cams.
The benefit of these are for track cars seeing a very high powerband to 10k and above. The rollers take the beating alot better than a normal vtec cam rocker setup would. Alot of the high hp boosted guys use these setups (9second cars) and I've also seen a few verrrry built N/A track cars with them.
I guarentee you dont have setup that would capitolize on the benefits so stick with off the shelf vtec cams. Skunk 2 pro cams are a great choice. Which ones to go with depend on your compression/setup.

couldnt agree with any more....

[Honda2000]

i agree. your wasting your money. i heard type R cams are really good even for turbo. they are OEM for a reason.

[Jroc860]

CTR's ftw!!!

[V8-KILLER]

just get skunk2 pro 2s...

[leo2006leo]