2000 JDM B20B in an EG Coupe!! HELP!!

[crzycivic93]

So I have a few questions about a swap I'm about to do in my EG. It's going to be a 2000 JDM B20B. I have a chipped LS ECU that I can use, but what do I need to remove from the 95 LS to put on the B20? Is there anyone out there that has done this swap and can help me? Its the one with the box over the intake. I've read that the box gives you more power in the 3500-4500 rpm range. Do I have to remove this? If so, will i lose HP? Can I use the intake manifold that comes on it? Throttle Body? I am also using the harness that is on the car. Please anyone HELP!!!!!!!!!!!!!!!!

[LS/Vtec]

if your using the harness thats in the car then take the injectors and dizzy of the 95 ls n put it on the b twizzy

[evo-mentalites-cc]

also need to get obd1 alternator and dizzy

[ct tibby]

yupp ur gonna need to change the flux capacitor over too possibly the harmonic balancer all depends tho

[crzycivic93]

Are those the only 2 things? What about the dizzy??

[crzycivic93]

tibby- depends on what??

[ct tibby]

if the b20 has it on there allready

[LS/Vtec]

yupp ur gonna need to change the flux capacitor over too possibly the harmonic balancer all depends tho

harmonic balancer should be fine but yes you'll need to change the flux capacitor and valve float assembly over.

[ct tibby]

see i thought u need to change the float over but wasnt sure

[crzycivic93]

So I take all this off the LS?? Where is the Valve Float Assem.??????

[ct tibby]

its under the valve cover it looks like a gas tank floater

[LS/Vtec]

make sure you use olive oil wen re assembling everything to make sure it's all lubed up.

[ct tibby]

yea dont use reg oil untill its time to start the motor the olive oil will go away once the motor is hot its a neat lil trick

[civicdrew]

lol you guys are fucked up haha wayyyyyy tooo muchhh back to the future was watched over here lol

[crzycivic93]

now where is the flux capacitor?? i have never done this before.. It comes with the knock sensor too.