Announcement

Collapse
No announcement yet.

misfire drivin me crazy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • misfire drivin me crazy

    so my b16 is misfiring ne thing over half throttle at first then i changed with a diff one i had layin around it was a lil better than b4 but within 5 mins it was breaking up again . mayb when the coil gets hot ???. im goin to check my tps voltage later nd mayb go external coil ... when i was changin coil realizedd my rotor screw was not on it was inside dizzy cap so i put that on.. the rotor looked ok but i mite try changin that .. ne other ideas ?

  • #2
    i had kind of the same problem... there were a few things i fixed that worked,, put in some differnt plugs, part of the wireharness was burnt causing the ecu not data logging

    Comment


    • #3
      uhhh wire harness doesn't sound fun think my plugs r fine i'll have to check that later on i'm thinkin coil / plug wires

      Comment


      • #4
        what spark plugs you got in it?

        Comment


        • #5
          check injectors as well....

          Comment


          • #6
            update .... tried to dial in tps again and it stopped cutting out but it jus lope a very tiny bit .. feels like i have all my power back jus need to find a multimeter to completely fine tune tps nd hopefully that fix the lope

            Comment


            • #7
              and i have sum ngks

              Comment


              • #8
                Check fuel injectors, compression and injecter plugs?
                Photobucket

                Comment


                • #9
                  think its all good jus need to dial in tps again

                  Comment

                  Working...
                  X