Car won't go into gear!!

[DC2kid21]

my 96 integra GSR won't go into gear...i changed my clutch master and slave cylinder in the last 6 months and it drove fine, clutch gripped well then randomly a few weeks ago my car would shake a little in first gear and i had to pump the clutch a bit for it to get into gear. I have since bled the clutch lines 5x..some air came out, it went into gear with no problem, clutch gripped fine. Then 5mins later my problem returned and my car wouldn't go into gear. it has the oem clutch still with 120,xxx but it was never really beat on and it grabbed fine a week before my problem occurred. Also i have noticed my clutch fluid go down a little bit, but i checked for leaks behind the master cylinder and on the floor, there is none so im kinda lost as to what my problem could be, i refilled the clutch fluid too btw before bleeding.

[JDM_DC5]

try replacing your slave cylinder again

[turbohatch900]

bump!

[LS/Vtec]

Have someone press your clutch pedal down well you watch your slave cylinder to see if it's working. Can you put it into gear well th car is off?

[turbohatch900]

try bleeding you cylinders while somone pumps the air out the lines then hold the clutch while replacing it or just by a new one

[jrsc_b18c1_12psi]

Can you put it into gear well the car is off?

x2

[DC2kid21]

Have someone press your clutch pedal down well you watch your slave cylinder to see if it's working. Can you put it into gear well th car is off?

ok,i'll try that tomorrow; yeah it goes in with no problem when the car is off, i doubt its the synchros because it went into gear fine

[LS/Vtec]

prolly a shitty slave cylinder if it goes in fine when the car is off.

[DC2kid21]

prolly a shitty slave cylinder if it goes in fine when the car is off.

yeah i bought a napa one because i needed it that day..never again lol, assuming thats the problem...but I'm guna get one at honda tomorrow and try that out..theres fluid slowly leaking too...but its not behind the master or on the floor anywhere

[jrsc_b18c1_12psi]

Sounds like you broke something in the disc meaning your gonna need a new clutch same thing has happened to me twice using ebay clutches spring from disc broke off and wedged into the pressure plate making it so it Wouldnt release

[LS/Vtec]

that could be your problem. If your just gonna buy a new one and see if that fixes it i'd just go to Autozone cuz they are only like $20 brand new. That way if it's not that you didn't waste a lot of money. Hopefully it's just a bad slave cyliner n leaking up fron at the slave cylinder so it's a cheap easy fix.

[LS/Vtec]

Sounds like you broke something in the disc meaning your gonna need a new clutch same thing has happened to me twice using ebay clutches spring from disc broke off and wedged into the pressure plate making it so it Wouldnt release

yea ebay clutches are junk. but im wondering where his fluid is going.

[oemwh0r3]

launched a spring completely or partially like stated earlier.. this is what happens when you do too many holeshots or not revmatching when downshifting

[DC2kid21]

Sounds like you broke something in the disc meaning your gonna need a new clutch same thing has happened to me twice using ebay clutches spring from disc broke off and wedged into the pressure plate making it so it Wouldnt release

idk I was going to get a new clutch this week incase, but friday we bled it..and it reversed out of my driveway with no problem, but then wouldn't go into first what so ever, or any gear while the car was on. Turned it off an rolled it back into the garage lol and it went into gear while the car was off.

[DC2kid21]

launched a spring completely or partially like stated earlier.. this is what happens when you do too many holeshots or not revmatching when downshifting

would this not allow the car to go in gear what so ever?