wire harness prob

[Cr1m203]

only the re pin on the dx harness for the idle air control valve, everything else for the other harnesses

^^ x2

[yfsrcer]

the hx harness plugs and plays with everything

[redeg666]

the hx harness plugs and plays with everything

the egr valve plug will not, but everything else will

[Cr1m203]

if its a dx u will need to re pin the idle air control valve and if u run the obd2 ls ecu u will need to change the plug on the harness for the crank pos sensor to the b series one, i believe the back up sensor plug is the same, use it from a spare harness

or you can bypass it and not even need that crank crap...as I did it already and also PASSed Emissions

[yfsrcer]

the egr valve plug will not, but everything else will

i used an obd1 motor, and used jumper harnesses for the dizzy, and the ecu, and the injectors, and there isnt any egr valve with obd1

[Cr1m203]

i used an obd1 motor, and used jumper harnesses for the dizzy, and the ecu, and the injectors, and there isnt any egr valve with obd1

well not with ls motors and stuff....but accords and some civics used EGR valves for obd 1