b16 into eg coupe?

[jdmjunkie9753]

Ok so I am looking Into buying this b16a complete swap with axles and mounts out of a crx.. will the axles and mounts work for my 94 eg coupe? I need to know asap so please lmk!

[jrsc_b18c1_12psi]

mounts will not work axes will

[jdmjunkie9753]

Positive?

[JdmEgHatch]

Axles will work not mounts jump

[jdmjunkie9753]

Iight good looks guys I didn't wanna get mounts I didn't need..

[jrsc_b18c1_12psi]

Positive?

im positive just did the same swap in my buddys car you can change out the post mount on drives side and run a 94-01 integra mount but cable tranny will need cable to hydro mount or you can just swap out tranny and clutch with a hydro setup and it will be a direct bolt in swap

[jdmjunkie9753]

So the drivers post mount and the tranny mount would be the only ones I gotta change?

[jrsc_b18c1_12psi]

yeah rear mount always stays the same in an eg with the acception of h and k series if i remember correcly but you will need a 94-01 integra rear t bracket

[ManTyme]

and i have the 94+ rear t bracket