Idle Problem.

[Bsickteen]

Bump up the idle screw a bit, if it is still stalling remove the iacv and see if the small screen is pluged.

[LS/Vtec]

Yea i'll do that next nice day if we ever get one. The scren isnt clogged. I just put it on the yesterday.

[Bsickteen]

Cleaning your throttle body is big thing too. If it's gumed up your idle will be low.

[delsoleg1]

there is a power steering pressure switch that bumps up idle when you turn the wheel. it is located on the pressure hose that goes to the top of the pump. the wire colors are usually green and black with a green connector.

just take off tha belt and see if it still does it if it does than u either have a vaccum leak or a short in a wire or plug

[LS/Vtec]

bump bump bump. Im gonna take the belt off n go from there. But even if the wheel is straight and i rev it up as soon as i let off the gas it revs down rly low and stalls or idles like shit for a min then goes back up.

[delsoleg1]

does ur vss work good cuz tha ecu uses that to control idle also

[LS/Vtec]

my vss isn't working lol. But I think it's my cluster. Im not sure i'll look tomorrow.

[delsoleg1]

ther u go bro i think thats ur problem

[LS/Vtec]

yea but when i got the car the speed sensor worked. Then I swapped clusters n it doesn't. So that'd be the cluster. And aslong as the speed sensor is still working it will send a signal to the ecu. Just the needle wouldn't work cuz the gauge. I dunno. I think I may have a vaccum leak or need to adjust my idle.

[delsoleg1]

yea but i had a bubble ith that same prob i had no vaccum leaks and adjusted idle screw and nothin ended up being vss sensor also my cluster didnt work either

[LS/Vtec]

Damn I got like 2 or 3 vss i'll try it n see what happens. Thx.

[delsoleg1]

no prob bro

[delsoleg1]

keep me posted would like to kno wat was wrong

[LS/Vtec]

shouldn't it have a cel if the vss is bad?

[delsoleg1]

sometimes mines had the cel on but when i diagnosed it tha vss didnt come up as one of tha codes