ls crank on gsr block ????

[YoMo-dc]

so this its my ????
i have a gsr block ,itr pistons on gsr rods .....
so i was search for the right answer ....if i use a gsr block with ls crank and rods and itr pistons what bearing do i need to use from ls or gsr ????
i know if i use a ls rods i need to use arp rod bolts .....


so this its what im trying to build
gsr block
ls crank and rods
itr pistons
b16 head and also i need to shave the head or not ???



pls any input will be appreciate

[evo-mentalites-cc]

shave the head if it wasnt already done that also ups the compression alil

[delsoleg1]

the gsr block uses block girdle and oil jets besides that everything else is tha same so just use everythin for a ls cuz ur using ls crank and rods

[YoMo-dc]

o

but i can use itr pistons right??? and what about the bearing wich one i use i have allready gsr bearing do i need to use ls bearing or from a gsr

the gsr block uses block girdle and oil jets besides that everything else is tha same so just use everythin for a ls cuz ur using ls crank and rods

[BuiltNotBought22]

if your asking bout ur rod bearings use the ls ones.

[delsoleg1]

but i can use itr pistons right??? and what about the bearing wich one i use i have allready gsr bearing do i need to use ls bearing or from a gsr

yes u could use itr pistons as long as they are stock 81mm bore and for rod bearings use ls, main bearing u can use either

[YoMo-dc]

ok

[delsoleg1]

oh and to add on wat i said ur gonna need to shave 1mm off tha rods so tha pistons could fit

[YoMo-dc]

so the itr piston dont fit on ls rods right i need to machined??

[delsoleg1]

yup they fit tha bore in tha block but not on th ls rod but if u use p30 pistons which are almost identical to type r they'll fit right on those rods

[YoMo-dc]

bump need more input b cause a guy tell me the i can use itr in ls rods