Axle Broke inside tranny!!!! HELP

[hondakid4dr]

So while racing my axle snapped...but wen i pulled it out the i noticed the tip of the axle look a lil shorter then usual....so i realizez the whole section with the teeth are stuck inside the tranny!! any ideass on how 2 get it out??? help me been workin on gettin it out all day and its moved about 1 inch

[sicksirek]

take the other axle and push it out thru the other side

[P-CRIDER]

take the other axle and push it out thru the other side

do that with a thin punch and hammer should pop right out

[hondakid4dr]

dats wat i been doin but wat tool should i use i cant find nuttin 2 fit??

[honda 97]

try to use like a long extension and a hammer

[hondakid4dr]

i tried its 2 thick

[sicksirek]

try to use like a long extension and a hammer

x2 extension is def perfect u maybe talkin bout sumtihn else the hole in the tranny is like 3'' wide the extension is like 1/4'' - 1/2''

[LilPhil]

x2 extension is def perfect u maybe talkin bout sumtihn else the hole in the tranny is like 3'' wide the extension is like 1/4'' - 1/2''

yeah but if its not LSD there is a bar across the middle of the diff, ONLY LSD diffs u can see right threw same size, u need something smaller, go to Home Depot, they sell metal rods, find 1 skinny and long that will fit, and hammer it in the side of tranny that did NOT break axel and push it out tranny, if all fails, Pull tranny out and take apart the tranny to get it it out, sux, but u gotta do what u gotta do

[JDM8o9]

Maybe take like nut and weld that to the broken piece and pull it out

[LilPhil]

Maybe take like nut and weld that to the broken piece and pull it out

good luck getting a welder in there, and if the ring clip is still on the broken piece of axel in the tranny, its going to be even harder to get it out, prob going to have to pull tranny, for all the time u spend trying to get it out u can just take the tranny out and have it apart and done, i can pull that trans and have it apart, and busted piece out in 30mins easy

[P-CRIDER]

U need a thin punch and hammer...trust it will come out

[H23VTECLUDE]

Your gonna need something thin enough to go around the diff. pin, but yet thick enough to not bend when struck with the hammer. If all else fails, pull tranny out, & take apart.

[H22SteakSauce]

lmao is this just the thing thats happening this month! same shit happend to my boy like 3 days ago while we were driving around in hartford! it just encouraged us to stage 3 clutch and 8 lb fly wheel it!

[single slam 12]

it's out i went there today and took it out 4 dollar carbon rod from home depot 3 feet long thin grinded one end down a lil bit and then took the dead blow to it and it popped out with ease. wayne one axle to put in and your on your way.

[doitpropa]

go danny :)